Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Ofcet 6.50

Sailboat specifications

The Ofcet 6.50 is a 21’4” (6.5m) single handed racing sailboat designed by Etienne Bertrand (France). She was built between 2014 and 2019 by Ofcet (France).

Ofcet 6.50's main features

Model
Ofcet 6.50
Hull type
Monohull
Category
Single handed racing sailboat
Sailboat builder
Sailboat designer
Sailboat collection
Country
France
Construction
GRP (glass reinforced polyester):
Single skin fiberglass polyester (vacuum infusion)
First built hull
2014
Last built hull
2019
Appendages
Keel : T-shaped keel (with bulb)
Helm
Single tiller
Rudder
Twin transom hung rudders
Unsinkable
Yes
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
B
Standard public price ex. VAT (indicative only)
About 
44 200
 (2017)

Ofcet 6.50's main dimensions

Hull length
21’ 4”6.5 m
Beam (width)
9’ 10”2.98 m
Draft
5’ 2”1.6 m
Mast height from DWL
36’ 1”11 m
Light displacement (MLC)
2138 lb970 kg
Ballast weight
948 lb430 kg

Ofcet 6.50's rig and sails

Upwind sail area
447 ft²41.5 m²
Downwind sail area
1066 ft²99 m²
Mainsail area
258 ft²24 m²
Solent area
188 ft²17.5 m²
Stormjib area
48 ft²4.5 m²
Asymmetric spinnaker area
807 ft²75 m²
Gennaker area
253 ft²23.5 m²
Code 5 area
409 ft²38 m²
Rigging type
Sloop Marconi 9/10
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars

Ofcet 6.50's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
456 ft²/T42.35 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
1087 ft²/T101.03 m²/T
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
44 %

Ofcet 6.50's auxiliary engine

Engine(s)
Outboard engine
Fuel type
Gas

Ofcet 6.50's accommodations and layout

Cockpit
Open aft cockpit
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Pogo Foiler (Pogo Structures)
2019
21’ 4”6.5 m
Figaro 2 (Bénéteau)
2003
33’ 2”10.11 m
Figaro 3 (Bénéteau)
2017
32’9.75 m
Melges 20 (Melges)
2009
19’ 11”6.07 m
Farr 280 (Premier Composite Technologies)
2013
28’ 7”8.72 m
Seascape 24 (Seascape)
2016
24’7.3 m
VX One (Ovington Boats)
2011
19’5.79 m
Ice 33 (Ice Yachts)
2014
32’ 10”9.99 m
First 24 - 2018 (Bénéteau)
2018
24’7.3 m
First 18 - 2018 Standard (Bénéteau)
2018
18’5.5 m
RS 21 Club (RS Sailing)
2018
20’ 10”6.34 m
Hunter 170 (Marlow Hunter)
1999
17’5.18 m
Seascape 18 Standard (Seascape)
2008
18’5.5 m
Pogo 3 (Pogo Structures)
2014
21’ 4”6.5 m
Pogo 6.50 (Pogo Structures)
1994
21’ 4”6.5 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more