Boat-Specs.com

Sailboat specifications and datasheets

Ofcet 32

The Ofcet 32 is a 32’2” monohull sailboat designed by Marc Lombard. She was built by Ofcet (France) and made of sandwich PVC / fiberglass (composite infusion). The production started in 2016 .

The Ofcet 32 is as well listed, on Boat-Specs.com, in version SC.

Find out more about the Ofcet 32 on Boat-Spec's blog: New sailboats 2017 - France 1/2

Ofcet 32 Ofcet 32 sailplanOfcet 32 sailplanOfcet 32 layoutOfcet 32 layoutOfcet 32 layoutOfcet 32 sailingOfcet 32 sailingOfcet 32 sailingOfcet 32 sailingOfcet 32 sailingOfcet 32 accommodationsOfcet 32 accommodationsOfcet 32 accommodationsOfcet 32 accommodationsOfcet 32 accommodations
Ofcet 32's   Main Features
Model Ofcet 32
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Marc Lombard
Construction Hull and deck:
sandwich PVC / fiberglass (composite infusion)
First built hull 2016
Last built hull Still in production
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 2 spade rudders
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
115 000
(2017)
Ofcet 32's   Main dimensions
Length overall 33’ 10”
Hull length 32’ 2”
Waterline length 30’ 1”
Beam (width) 11’
Draft 6’ 2”
Light displacement 7496 lbs
Ballast weight 3417 lbs
Ballast type Lead
Ofcet 32's   Rig and sails
Upwind sail area 624 sq.ft
Downwind sail area 1302 sq.ft
Mainsail area 334 sq.ft
Genoa area 291 sq.ft
Symetric spinnaker area 969 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Carbon fiber
Number of levels of spreaders 2
Spreaders angle Swept-back
Ofcet 32's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.65
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
53.51
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
124
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
46 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.35 knots
Ofcet 32's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 18 HP
Fuel type Diesel
Fuel tank capacity 10.6 gal
Ofcet 32's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 7
Head(s) 1
Fresh water tank capacity 23.8 gal
Chart table 2’ 5” x 2’ 6”
Galley headroom 6’
Head headroom 5’ 11”
Ofcet 32's   Saloon
Saloon table length 3’ 8”
Saloon table width 3’ 11”
Berth length 6’ 6”
Berth width 1’ 7”
Ofcet 32's   Fore cabin
Maximum headroom 5’ 7”
Berth length 6’ 7”
Berth width 6’ 11”
Ofcet 32's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 4”
Berth width 4’ 10”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
J/9531’ 2”2009
Salona 33 Deep draft32’ 10”2013
Dehler 32 Standard32’ 2”2010
JPK 96031’ 6”2003
First 30 JK Standard31’ 2”2010
Elan E3 Deep draft30’ 4”2016
Elan E4 Standard34’ 10”2016
Elan 350 Standard34’ 10”2011
Elan 310 Standard30’ 4”2009
J/8829’ 2”2013
Dehler 35SQ Standard34’ 6”2012
J/11S35’ 10”2016
Elan 340 Standard32’ 10”2006
J/92s29’ 11”2005
Dehler 34 - J&V Standard33’ 10”2016
^