Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Swan 115 FD Lifting keel

Sailboat specifications

The Swan 115 FD is a 115’6” (35.2m) fast cruising sailboat designed by Frers Naval Architecture & Engineering (Argentina). She was built between 2015 and 2019 by Nautor's Swan (Finland). The Lifting keel version features an appendage configuration without compromise between draft and performance. Only drawback: some space is taken inside by the keel.

The Swan 115 FD is as well listed, on Boat-Specs.com, in Standard version (see all the versions compared).

Swan 115 FD's main features

Model
Swan 115 FD
Version
Lifting keel
Hull type
Monohull
Category
Offshore fast cruising sailboat
Sailboat builder
Sailboat designer
Country
Finland
Construction
Carbon fiber reinforced epoxy:
Sandwich Nomex carbon fiber epoxy
First built hull
2015
Last built hull
2019
Appendages
Lifting keel : fin with bulb, lifting
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
Standard public price ex. VAT (indicative only)
N/A

Swan 115 FD's main dimensions

Hull length
115’ 6”35.2 m
Waterline length
107’ 8”32.84 m
Beam (width)
26’ 7”8.12 m
Draft
18’ 11”5.75 m
Draft when appendages up
11’ 6”3.5 m
Light displacement (MLC)
203928 lb92500 kg
Maximum displacement (MLDC)
243831 lb110600 kg
Ballast weight
70548 lb32000 kg
Ballast type
Lead

Swan 115 FD's rig and sails

Upwind sail area
7102 ft²659.8 m²
Downwind sail area
10613 ft²986 m²
Mainsail area
3832 ft²356 m²
Jib area
3270 ft²303.8 m²
Asymmetric spinnaker area
6781 ft²630 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
145’ 8”44.42 m
J
 iFore triangle base (from mast foot to bottom of forestay)
43’ 10”13.35 m
P
 iMainsail hoist measurement (from tack to head)
142’ 8”43.5 m
E
 iMainsail foot measurement (from tack to clew)
44’ 7”13.6 m
Rigging type
Sloop Marconi 19/20
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
4
Spreaders angle
Swept-back
Spars construction
Carbon fiber spars

Swan 115 FD's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
347 ft²/T32.26 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
519 ft²/T48.21 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
74
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
35 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
13.91 knots

Swan 115 FD's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
450 HP
Fuel type
Diesel
Fuel tank capacity
1452.9 gal5500 liters

Swan 115 FD's accommodations and layout

Cockpit
Open aft cockpit
Cabin(s)
7
Berth(s)
14
Head(s)
7
Freshwater tank capacity
792.5 gal3000 liters
Holding tank capacity
369.8 gal1400 liters
Boiler capacity
58.1 gal220 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Salona 60 Lifting keel (AD Boats)
2012
63’19.2 m
Oyster 825 Standard (Oyster)
2014
79’ 2”24.14 m
IMX 70 (X-Yachts)
2005
70’ 2”21.4 m
X-73 (X-Yachts)
2001
72’21.95 m
X65 Deep draft (X-Yachts)
2016
63’19.19 m
Oyster 745 Keel and centerboard (Oyster)
2014
71’ 8”21.86 m
Oyster 885 (Oyster)
2013
85’ 6”26.06 m
Swan 115 FD Standard (Nautor's Swan)
2015
115’ 6”35.2 m
Swan 115 S Lifting keel (Nautor's Swan)
2015
115’ 6”35.2 m
Swan 95 S Lifting keel (Nautor's Swan)
2015
94’ 8”28.87 m
Ice 62 Lifting keel (Ice Yachts)
2014
61’ 10”18.83 m
Contest 85CS Standard (Conyplex)
2018
84’ 10”25.85 m
Hylas 70 Deep draft (Hylas Yachts)
2007
68’ 11”21.01 m
Oyster 1225 (Oyster)
2019
118’ 1”36 m
Oyster 885 Series II (Oyster)
2018
85’ 6”26.06 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more