Boat-Specs.com

Sailboat specifications and datasheets

Moody 45 Aft deep draft

The Moody 45 Aft, here in "deep draft" version, is a 45’ monohull sailboat designed by Bill Dixon. She was built by Moody (United Kingdom) and made of sandwich balsa / fiberglass / polyester. The production started in 2010 .

The Moody 45 Aft is as well listed, on Boat-Specs.com, in version Shoal draft.

Moody 45 Aft Moody 45 Aft sailplanMoody 45 Aft layoutMoody 45 Aft sailingMoody 45 Aft sailingMoody 45 Aft sailingMoody 45 Aft sailingMoody 45 Aft sailingMoody 45 Aft accommodationsMoody 45 Aft accommodationsMoody 45 Aft accommodationsMoody 45 Aft accommodations
Moody 45 Aft's   Main Features
Model Moody 45 Aft
Version Deep draft
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Bill Dixon
Construction Hull and deck:
sandwich balsa / fiberglass / polyester
First built hull 2010
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Moody 45 Aft's   Main dimensions
Length overall 46’
Hull length 45’
Waterline length 40’
Beam (width) 13’ 10”
Draft 7’ 2”
Light displacement 26896 lbs
Ballast weight 7385 lbs
Ballast type Cast iron
Moody 45 Aft's   Rig and sails
Upwind sail area 1206 sq.ft
Downwind sail area 1927 sq.ft
Mainsail area 560 sq.ft
Genoa area 646 sq.ft
Jib area 409 sq.ft
Asymetric spinnaker area 1367 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 55’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 16’ 2”
PiMainsail hoist measurement (from tack to head) 54’ 5”
EiMainsail foot measurement (from tack to clew) 19’ 6”
Moody 45 Aft's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
21.13
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
33.78
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
190
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
27 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.48 knots
Moody 45 Aft's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 53 HP
Fuel type Diesel
Fuel tank capacity 58.1 gal
Moody 45 Aft's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) 2
Fresh water tank capacity 84.5 gal
Fridge/ice-box capacity 34.3 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Bavaria Cruiser 45 Standard44’ 7”2010
Hanse 455 Standard44’ 6”2014
Bavaria Cruiser 46 Standard44’ 7”2014
Vision 46 Standard44’ 11”2013
Sun Odyssey 469 Deep draft44’ 10”2012
Moody 45 DS Deep draft45’2008
Hallberg-Rassy 43 Mk II44’ 6”2007
Sun Odyssey 479 Deep draft44’ 10”2015
Dufour 460 Grand Large44’ 4”2016
Hallberg-Rassy 4444’ 11”2016
Catalina 445 Fin keel43’ 1”2009
Moody 41 Aft Deep draft41’ 8”2009
Delphia 46 DS Deep draft46’2011
Delphia 47 Deep draft46’ 7”2008
Sense 46 Deep draft45’ 4”2012
^