Boat-Specs.com

Sailboat specifications and datasheets

Moody 41 Aft deep draft

The Moody 41 Aft, here in "deep draft" version, is a 41’8” monohull sailboat designed by Bill Dixon. She was built by Moody (United Kingdom) and made of sandwich balsa / fiberglass / polyester. The production started in 2009 .

The Moody 41 Aft is as well listed, on Boat-Specs.com, in version Shoal draft.

Moody 41 Aft Moody 41 Aft sailplanMoody 41 Aft layoutMoody 41 Aft layoutMoody 41 Aft layoutMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft sailingMoody 41 Aft cockpitMoody 41 Aft accommodationsMoody 41 Aft accommodationsMoody 41 Aft accommodationsMoody 41 Aft accommodationsMoody 41 Aft accommodations
Moody 41 Aft's   Main Features
Model Moody 41 Aft
Version Deep draft
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Bill Dixon
Construction Hull and deck:
sandwich balsa / fiberglass / polyester
First built hull 2009
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
199 000
(2017)
Moody 41 Aft's   Main dimensions
Hull length 41’ 8”
Waterline length 35’ 10”
Beam (width) 13’ 1”
Draft 6’ 7”
Light displacement 21605 lbs
Ballast weight 6063 lbs
Ballast type Cast iron
Moody 41 Aft's   Rig and sails
Upwind sail area 996 sq.ft
Downwind sail area 1658 sq.ft
Mainsail area 474 sq.ft
Genoa area 522 sq.ft
Jib area 355 sq.ft
Asymetric spinnaker area 1184 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 50’ 11”
JiFore triangle base (from mast foot to bottom of forestay) 14’ 11”
PiMainsail hoist measurement (from tack to head) 50’
EiMainsail foot measurement (from tack to clew) 18’ 4”
Moody 41 Aft's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
20.20
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
33.63
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
214
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
28 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.01 knots
Moody 41 Aft's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 38 HP
Fuel type Diesel
Fuel tank capacity 37 gal
Moody 41 Aft's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 84.5 gal
Fridge/ice-box capacity 34.3 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hallberg-Rassy 41241’ 5”2012
Vision 42 Standard41’2012
Hallberg-Rassy 40 MkII40’ 8”2015
Catalina 445 Fin keel43’ 1”2009
Impression 45 Deep draft42’ 8”2015
Moody 45 Aft Deep draft45’2010
Marlow Hunter 42 SS Shoal draft40’2017
Sun Odyssey 439 Deep draft42’ 7”2010
Hallberg-Rassy 4040’ 8”2002
Marlow Hunter 40 Shoal draft40’2013
Southerly 42 RST42’ 2”2007
Catalina 400 MkII Fin keel40’ 6”2000
Southerly 42042’ 2”2010
Bavaria 40 Cruiser - Farr Standard39’ 4”2010
Bavaria Cruiser 41 Standard39’ 4”2011
^