Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Marlow Hunter 42 SS Deep draft

Sailboat specifications

The Marlow Hunter 42 SS is a 40’ (12.19m) cruising sailboat designed by Hunter Design (United States). She is built since 2017 by Marlow Hunter (United States). The Deep draft version displays a deeper fin allowing a lower center of gravity and extra performance especially upwind.

The Marlow Hunter 42 SS is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Marlow Hunter 42 SS's main features

Model
Marlow Hunter 42 SS
Version
Deep draft
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Country
United States
Construction
GRP (glass reinforced polyester):
Single skin bottom, sandwich sides and deck: honeycomb fiberglass polyester with Kevlar reinforcements
First built hull
2017
Last built hull
Still in production
Appendages
Keel : fin without bulb
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
N/A

Marlow Hunter 42 SS's main dimensions

Overall length
41’ 2”12.57 m
Hull length
40’12.19 m
Waterline length
36’10.97 m
Beam (width)
13’ 2”4.01 m
Draft
6’ 8”2.03 m
Mast height from DWL
63’ 2”19.27 m
Light displacement (MLC)
19096 lb8662 kg
Ballast weight
5423 lb2460 kg
Ballast type
Cast iron

Marlow Hunter 42 SS's rig and sails

Upwind sail area
910 ft²84.54 m²
Rigging type
Sloop Marconi (in-mast furling mainsail) fractional
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back (Bergström)
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Marlow Hunter 42 SS's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
216 ft²/T20.04 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
186
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
28 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.04 knots

Marlow Hunter 42 SS's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
45 HP
Fuel type
Diesel
Fuel tank capacity
49.9 gal189 liters

Marlow Hunter 42 SS's accommodations and layout

Cockpit
Closing aft cockpit with opening system
Cabin(s)
2
Berth(s) (min./max.)
4 / 6
Head(s)
1
Freshwater tank capacity
90.1 gal341 liters
Holding tank capacity
39.9 gal151 liters
Boiler capacity
5 gal19 liters
Maximum headroom
6’ 6”1.98 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Moody 41 Aft Deep draft (Moody)
2009
41’ 8”12.7 m
Impression 45 Deep draft (Elan Yachts)
2015
42’ 8”13 m
Super Maramu (Amel)
1988
52’ 6”16 m
Hunter 456 Deep draft (Marlow Hunter)
2003
44’ 4”13.49 m
Sun Odyssey 419 Deep draft (Jeanneau)
2015
39’ 4”11.98 m
Océanis 41.1 Deep draft (Bénéteau)
2015
39’ 4”11.98 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Marlow Hunter 37 Deep draft (Marlow Hunter)
2014
37’ 6”11.43 m
Marlow Hunter 42 SS Shoal draft (Marlow Hunter)
2017
40’12.19 m
Marlow Hunter 40 Deep draft (Marlow Hunter)
2013
40’12.19 m
Hunter 38 Deep draft (Marlow Hunter)
2004
36’ 8”11.18 m
Sun Odyssey 410 Deep draft (Jeanneau)
2019
39’ 4”11.99 m
Hunter 40 Deep draft (Marlow Hunter)
1984
39’ 7”12.08 m
Hunter 380 Deep draft (Marlow Hunter)
1999
37’ 1”11.3 m
Sun Odyssey 409 Deep draft (Jeanneau)
2010
39’ 4”11.98 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more