Boat-Specs.com

Sailboat specifications and datasheets

Marlow Hunter 37 furling mainsail

The Marlow Hunter 37, here in "furling mainsail" version, is a 37’6” monohull sailboat designed by Glenn Henderson. She was built by Marlow Hunter (United States) and made of monolithic bottom, sandwich sides and deck: balsa / fiberglass / polyester with Kevlar reinforcements. The production started in 2014 .

The Marlow Hunter 37 is as well listed, on Boat-Specs.com, in version Shoal draft and Deep draft.

Marlow Hunter 37 Marlow Hunter 37 layoutMarlow Hunter 37 sailingMarlow Hunter 37 sailingMarlow Hunter 37 sailingMarlow Hunter 37 sailingMarlow Hunter 37 accommodationsMarlow Hunter 37 accommodationsMarlow Hunter 37 accommodationsMarlow Hunter 37 accommodationsMarlow Hunter 37 accommodationsMarlow Hunter 37 accommodations
Marlow Hunter 37's   Main Features
Model Marlow Hunter 37
Version Furling mainsail
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Glenn Henderson
Construction Hull:
monolithic bottom, sandwich sides and deck: balsa / fiberglass / polyester with Kevlar reinforcements
Deck:
sandwich balsa / fiberglass / polyester
First built hull 2014
Last built hull Still in production
Appendages Keel :
Wing keel
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Marlow Hunter 37's   Main dimensions
Length overall 39’ 10”
Hull length 37’ 6”
Waterline length 35’ 8”
Beam (width) 13’ 1”
Draft 5’
Mast height from DWL 61’ 2”
Light displacement 18995 lbs
Ballast weight 5728 lbs
Marlow Hunter 37's   Rig and sails
Upwind sail area 764 sq.ft
Rigging type Sloop Marconi (in-mast furling mainsail) fractional
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back (Bergström)
Marlow Hunter 37's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
16.89
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
190
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
30 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.00 knots
Marlow Hunter 37's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 29 HP
Fuel type Diesel
Fuel tank capacity 49.9 gal
Marlow Hunter 37's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1
Fresh water tank capacity 80 gal
Water heater capacity 5 gal
Holding tank capacity 25.1 gal
Maximum headroom 6’ 6”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hunter 36 - 2011 Furling mainsail34’ 7”2011
Marlow Hunter 40 Furling mainsail40’2013
Catalina 390 Tall rig38’ 8”2001
Marlow Hunter 33 Furling mainsail33’ 1”2011
Salona 38 Deep draft37’ 8”2011
Salona 38 Medium draft37’ 8”2011
JPK 38 Fast Cruiser Swing keel37’ 4”2012
Catalina 36 MkII Tall rig36’ 4”1994
Elan S5 Shoal draft39’ 2”2015
Elan E5 Shoal draft39’ 2”2015
Bavaria Cruiser 37 Shoal draft35’ 10”2014
Hunter 33 - 2004 Furling mainsail33’ 1”2004
Bavaria Cruiser 41 Shoal draft39’ 4”2011
Delphia 34 Centerboard (Trunk)32’ 7”2014
Delphia 34 Keel and centerboard32’ 7”2014
^