Boat-Specs.com

Sailboat specifications and datasheets

Feeling 1090 deep draft

The Feeling 1090, here in "deep draft" version, is a 35’6” offshore monohull sailboat designed by Philippe Harlé and Alain Mortain. She was built by Kirié (France) and made of GRP (glass reinforced polyester). This sailboat was produced between 1986 and 1995 with about 200 hulls completed.

The Feeling 1090 belongs to the Feeling range. The Feeling 1090 is as well listed, on Boat-Specs.com, in version Shoal draft.

Kirié Feeling 1090 Kirié Feeling 1090 sailplanKirié Feeling 1090 layoutKirié Feeling 1090 sailingKirié Feeling 1090 accommodationsKirié Feeling 1090 accommodations
Feeling 1090's   Main Features
Model Feeling 1090
Version Deep draft
Type of hull Monohull
Shipyard
Designer Philippe Harlé
Alain Mortain
Range Feeling
Construction GRP (glass reinforced polyester)
First built hull 1986
Last built hull 1995
Number of hulls built About 200
Appendages Keel :
Fin without bulb
Helm 1 wheel
Rudder 1 spade rudder
Unsinkable No
Trailerable No
French navigation category 1
Standard public price ex. VAT (indicative only) N/A
Feeling 1090's   Main dimensions
Length overall 36’ 5”
Hull length 35’ 6”
Waterline length 28’ 11”
Beam (width) 11’ 10”
Draft 5’ 11”
Mast height from DWL 49’ 8”
Fore freeboard 3’ 8”
Mid-ship freeboard 3’ 4”
Light displacement 10803 lbs
Ballast weight 4409 lbs
Ballast type Lead
French customs tonnage 10.44 Tx
Feeling 1090's   Rig and sails
Upwind sail area 764 sq.ft
Downwind sail area 1302 sq.ft
Mainsail area 291 sq.ft
Genoa area 474 sq.ft
Solent area 323 sq.ft
Jib area 258 sq.ft
Stormjib area 67 sq.ft
Symetric spinnaker area 1012 sq.ft
Rigging type Sloop Marconi masthead
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 45’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 13’ 1”
PiMainsail hoist measurement (from tack to head) 40’ 5”
EiMainsail foot measurement (from tack to clew) 12’ 10”
Feeling 1090's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
24.61
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
41.94
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
204
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
41 %
Wetted surface 290 sq.ft
Righting moment @ 1°iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
959 lbs.ft
Maximum transverse section 15 sq.ft
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.20 knots
Feeling 1090's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 28 HP
Fuel type Diesel
Fuel tank capacity 31.7 gal
Feeling 1090's   Accommodation
Cabin(s) (min/max) 1 / 3
Berth(s) (min/max) 6 / 8
Head(s) 1
Fresh water tank capacity 63.4 gal
Fridge/ice-box capacity 31.7 gal
Maximum headroom 6’ 1”
Feeling 1090's   Fore cabin
Berth length 6’ 5”
Berth width 4’ 5”
Feeling 1090's   Aft cabin
Berth length 6’ 7”
Berth width 5’ 2”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Feeling 1100 Fin keel35’ 11”1982
Elite 37 Fin keel35’ 11”1982
Feeling 960 Deep draft31’ 6”1986
Elite 324 Deep draft31’ 6”1986
Elite 324 Keel and centerboard31’ 6”1986
Feeling 960 Keel and centerboard31’ 6”1986
Elite 326 31’ 4”1987
Elite 326 Deep draft31’ 4”1987
Feeling 326 31’ 4”1987
Feeling 326 Deep draft31’ 4”1987
Elite 326 Centerboard (Trunk)31’ 4”1987
Feeling 326 Centerboard (Trunk)31’ 4”1987
First 375 Deep draft37’1985
First 375 37’1985
Catalina 34 MkI Fin keel34’ 6”1985
Catalina 34 MkI Wing keel34’ 6”1985
Sun Odyssey 36 Deep draft35’ 5”1989
Sun Odyssey 36 35’ 5”1989
Oyster Heritage 3737’1984
Oyster SJ3534’ 10”1983
^