Boat-Specs.com

Sailboat specifications and datasheets

Elite 324 deep draft

The Elite 324, here in "deep draft" version, is a 31’6” monohull sailboat designed by Philippe Harlé. She was built by Kirié (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 1986 and 1988 with about 90 hulls completed.

The Elite 324 belongs to the Elite range. The Elite 324 has also been marketed as Feeling 960 and is as well listed, on Boat-Specs.com, in version Shoal draft and Keel and centerboard.

Kirié Elite 324 Kirié Elite 324 sailplanKirié Elite 324 layoutKirié Elite 324 sailingKirié Elite 324 accommodations
Elite 324's   Main Features
Model Elite 324
Version Deep draft
Type of hull Monohull
Category Cruiser-racer sailboat
Cockpit Closed aft cockpit
Shipyard
Designer Philippe Harlé
Range Elite
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 1986
Last built hull 1988
Number of hulls built About 90
Appendages Keel :
Fin without bulb
Helm 1 tiller (helm wheel in option)
Rudder 1 spade rudder
Unsinkable No
Trailerable No
French navigation category 2
Standard public price ex. VAT (indicative only) N/A
Elite 324's   Main dimensions
Length overall 32’ 7”
Hull length 31’ 6”
Waterline length 25’ 7”
Beam (width) 10’ 7”
Draft 5’ 11”
Light displacement 8598 lbs
Ballast weight 2998 lbs
Ballast type Cast iron
French customs tonnage 8.88 Tx
Elite 324's   Rig and sails
Upwind sail area 614 sq.ft
Downwind sail area 1009 sq.ft
Mainsail area 234 sq.ft
Genoa area 380 sq.ft
Solent area 297 sq.ft
Jib area 163 sq.ft
Stormjib area 70 sq.ft
Symetric spinnaker area 775 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 40’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 10”
PiMainsail hoist measurement (from tack to head) 35’ 1”
EiMainsail foot measurement (from tack to clew) 11’ 10”
Elite 324's   Performances
HN (French rating) 18.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
23.01
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
37.82
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
233
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
35 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.78 knots
Elite 324's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 9 HP / 18 HP
Fuel type Diesel
Fuel tank capacity 23.8 gal
Elite 324's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 50.2 gal
Fridge/ice-box capacity 23.8 gal
Maximum headroom 6’ 2”
Elite 324's   Saloon
Berth length 6’ 2”
Elite 324's   Fore cabin
Berth length 7’ 2”
Elite 324's   Aft cabin
Berth length 6’ 2”
Berth width 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Feeling 960 Deep draft31’ 6”1986
Elite 324 31’ 6”1986
Feeling 960 31’ 6”1986
Feeling 920 Deep draft30’ 4”1981
Elite 32 Deep draft30’ 4”1981
Feeling 920 30’ 4”1981
Elite 32 30’ 4”1981
Elite 326 31’ 4”1987
Elite 326 Deep draft31’ 4”1987
Feeling 326 31’ 4”1987
Feeling 326 Deep draft31’ 4”1987
Elite 326 Centerboard (Trunk)31’ 4”1987
Feeling 326 Centerboard (Trunk)31’ 4”1987
Moody 31 MkI Fin keel30’ 8”1983
Sun Rise 34 33’1984
Attalia 32 30’ 2”1983
Gib'Sea 96 Deep draft31’ 10”1983
X-312 Mast head rigging30’ 4”1989
X-312 Fractionnal rigging30’ 4”1989
Sun Liberty 34 Standard32’ 8”1989
^