Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Symphonie Deep draft

Sailboat specifications

The Symphonie is a 31’2” (9.5m) cruising sailboat designed by Philippe Briand (France). She was built between 1978 and 1984 by Jeanneau (France) with 367 hulls completed. The Deep draft version displays a deeper fin allowing a lower center of gravity and extra performance especially upwind.

The Symphonie is as well listed, on Boat-Specs.com, in Shoal draft and Keel and centerboard version (see all the versions compared).

Symphonie's main features

Model
Symphonie
Version
Deep draft
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
367
First built hull
1978
Last built hull
1984
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Former French navigation category
2
Standard public price ex. VAT (indicative only)
N/A

Symphonie's main dimensions

Hull length
31’ 2”9.5 m
Waterline length
26’ 2”8 m
Beam (width)
10’ 8”3.26 m
Waterline beam (width)
8’ 11”2.7 m
Draft
6’ 2”1.88 m
Mast height from DWL
46’ 4”14.1 m
Fore freeboard
3’ 6”1.08 m
Mid-ship freeboard
3’ 4”1.02 m
Light displacement (MLC)
9833 lb4460 kg
Maximum displacement (MLDC)
11321 lb5135 kg
Ballast weight
4409 lb2000 kg
Ballast type
Cast iron
French customs tonnage
9.46 Tx

Symphonie's rig and sails

Upwind sail area
658 ft²61.09 m²
Downwind sail area
1180 ft²109.66 m²
Mainsail area
212 ft²19.66 m²
Genoa area
446 ft²41.43 m²
Jib area
274 ft²25.46 m²
Symmetric spinnaker area
969 ft²90 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
42’ 2”12.85 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 6”4.1 m
P
 iMainsail hoist measurement (from tack to head)
36’ 7”11.15 m
E
 iMainsail foot measurement (from tack to clew)
10’ 8”3.25 m
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
Continuous

Symphonie's performances

IOR rating
 iIOR, or International Offshore Rule, was a measurement rule system used internationally for ocean racing. It allows boats of different sizes and designs to race each other fairly. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
24.2
HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
17.5
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
243 ft²/T22.55 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
436 ft²/T40.47 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
247
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
45 %
Wetted area
241 ft²22.39 m²
Maximum transverse section
15 ft²1.36 m²
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.87 knots

Symphonie's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
16 HP / 22 HP
Fuel type
Diesel
Fuel tank capacity
17.4 gal66 liters

Symphonie's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
1
Berth(s) (min./max.)
6 / 8
Head(s)
1
Freshwater tank capacity
31.7 gal120 liters
Maximum headroom
6’ 1”1.87 m
Head headroom
5’ 8”1.75 m

Symphonie's fore cabin

Maximum headroom
5’ 7”1.72 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Albin Ballad (Albin Marine)
1971
30’9.14 m
Symphonie Shoal draft (Jeanneau)
1978
31’ 2”9.5 m
Super Daïmio Deep draft (CNSO Constructions Nautique du Sud-Ouest)
1975
27’ 7”8.4 m
Attalia 32 Deep draft (Jeanneau)
1983
30’ 2”9.2 m
Sun Odyssey 32i Deep draft (Jeanneau)
2005
31’9.45 m
Océanis 350 Deep draft (Bénéteau)
1985
33’ 1”10.1 m
Brin de folie Deep draft (Jeanneau)
1975
29’ 6”9 m
Gib'Sea 96 Deep draft (Gibert Marine)
1983
31’ 10”9.7 m
Moody 31 MkI Fin keel (Moody)
1983
30’ 8”9.37 m
Melody Standard (Jeanneau)
1976
33’ 7”10.25 m
Etap 30 Deep draft (Etap)
1984
29’ 8”9.05 m
Sun Rise 34 Fin keel (Jeanneau)
1984
33’10.05 m
Dufour 4800 Deep draft (Dufour)
1981
34’ 11”10.65 m
Jouët 920 Deep draft (Yachting France)
1979
30’ 5”9.27 m
Dufour 3800 Deep draft (Dufour)
1980
30’ 6”9.3 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more