Boat-Specs.com

Sailboat specifications and datasheets

Sun Odyssey 39 DS standard

The Sun Odyssey 39 DS, here in "standard" version, is a 38’1” monohull sailboat designed by Marc Lombard. She was built by Jeanneau (France) and made of GRP (glass reinforced polyester). The production started in 2006 .

The Sun Odyssey 39 DS belongs to the Sun Odyssey DS range. The Sun Odyssey 39 DS is as well listed, on Boat-Specs.com, in version Shoal draft.

Jeanneau Sun Odyssey 39 DS Jeanneau Sun Odyssey 39 DS layoutJeanneau Sun Odyssey 39 DS layoutJeanneau Sun Odyssey 39 DS layoutJeanneau Sun Odyssey 39 DS sailingJeanneau Sun Odyssey 39 DS sailingJeanneau Sun Odyssey 39 DS sailingJeanneau Sun Odyssey 39 DS sailingJeanneau Sun Odyssey 39 DS accommodationsJeanneau Sun Odyssey 39 DS accommodationsJeanneau Sun Odyssey 39 DS accommodationsJeanneau Sun Odyssey 39 DS accommodations
Sun Odyssey 39 DS's   Main Features
Model Sun Odyssey 39 DS
Version Standard
Type of hull Monohull
Category Deck saloon cruising sailboat
Shipyard
Designer Marc Lombard
Range Sun Odyssey DS
Construction GRP (glass reinforced polyester)
First built hull 2006
Last built hull Discontinued
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Sun Odyssey 39 DS's   Main dimensions
Length overall 38’ 11”
Hull length 38’ 1”
Waterline length 35’ 1”
Beam (width) 12’ 8”
Draft 6’ 7”
Mast height from DWL 61’ 8”
Light displacement 17196 lbs
Ballast weight 5027 lbs
French customs tonnage 15.30 Tx
Sun Odyssey 39 DS's   Rig and sails
Upwind sail area 725 sq.ft
Downwind sail area 1401 sq.ft
Mainsail area 357 sq.ft
Genoa area 368 sq.ft
Symetric spinnaker area 1044 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
Sun Odyssey 39 DS's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
17.14
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
33.10
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
180
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
29 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.94 knots
Sun Odyssey 39 DS's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 40 HP
Fuel type Diesel
Fuel tank capacity 34.3 gal
Sun Odyssey 39 DS's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 5 / 7
Head(s) 1
Fresh water tank capacity 93.8 gal
Maximum headroom 6’ 2”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Sun Odyssey 41 DS Standard39’ 4”2012
Sun Odyssey 409 Deep draft39’ 4”2010
Sun Odyssey 379 Deep draft36’2011
Delphia 40.3 Deep draft39’ 2”2009
Sun Odyssey 40 DS Shoal draft38’ 6”1997
Bavaria 40 Cruiser - Farr Standard39’ 4”2010
Sun Odyssey 389 Deep draft36’2015
Sun Odyssey 419 Deep draft39’ 4”2015
Catalina 375 Fin keel37’ 4”2008
Bavaria Cruiser 41 Standard39’ 4”2011
Nordship 380 DS38’ 1”2007
Océanis 38 Deep draft36’ 6”2013
Nordship 360 DS36’ 1”2009
Hanse 400 Standard39’ 4”2006
Marlow Hunter 37 Shoal draft37’ 6”2014
^