Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sun Odyssey 389 Keel and centerboard

Sailboat specifications

The Sun Odyssey 389 is a 36’ (10.98m) cruising sailboat designed by Marc Lombard Yacht Design Group (France). She is built since 2015 by Jeanneau (France). The Keel and centerboard version features a centerboard inside of a short fin-keel allowing shoal draft while maintaining upwind capabilities.

The Sun Odyssey 389 has also been marketed as Sun Odyssey 379 and she is as well listed, on Boat-Specs.com, in Shoal draft and Deep draft version (see all the versions compared).

Sun Odyssey 389's main features

Model
Sun Odyssey 389
Version
Keel and centerboard
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
France
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2015
Last built hull
Still in production
Appendages
Centerboard : pivoting centerboard in the keel
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
130 000
 (2020)

Sun Odyssey 389's main dimensions

Overall length
37’ 2”11.34 m
Hull length
36’10.98 m
Waterline length
34’ 1”10.4 m
Beam (width)
12’ 4”3.76 m
Draft
7’ 5”2.25 m
Draft when appendages up
3’ 7”1.1 m
Mast height from DWL
55’ 10”17 m
Light displacement (MLC)
14771 lb6700 kg
Maximum displacement (MLDC)
15961 lb7240 kg
Ballast weight
5099 lb2313 kg
Ballast type
Cast iron exterior ballast with glass-fiber/polyester centerboard

Sun Odyssey 389's rig and sails

Upwind sail area
753 ft²70 m²
Downwind sail area
1442 ft²134 m²
Mainsail area
377 ft²35 m²
Genoa area
377 ft²35 m²
Jib area
251 ft²23.3 m²
Symmetric spinnaker area
1066 ft²99 m²
Asymmetric spinnaker area
973 ft²90.4 m²
Code 0 area
594 ft²55.2 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
46’ 8”14.22 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 7”4.15 m
P
 iMainsail hoist measurement (from tack to head)
44’ 7”13.6 m
E
 iMainsail foot measurement (from tack to clew)
13’ 11”4.25 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Sun Odyssey 389's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
212 ft²/T19.7 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
406 ft²/T37.7 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
169
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
35 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.83 knots

Sun Odyssey 389's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
29 HP
Fuel type
Diesel
Fuel tank capacity
34.3 gal130 liters

Sun Odyssey 389's accommodations and layout

Cockpit
Open aft cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s)
1
Freshwater tank capacity
52.8 gal200 liters
Holding tank capacity
21.1 gal80 liters
Fridge/ice-box capacity
48.9 gal185 liters
Boiler capacity
6.6 gal25 liters
Maximum headroom
6’ 4”1.93 m
Galley headroom
6’ 2”1.88 m

Sun Odyssey 389's saloon

Maximum headroom
6’ 4”1.92 m

Sun Odyssey 389's fore cabin

Maximum headroom
6’1.84 m
Berth length
6’ 10”2.07 m
Berth width
6’ 1”1.85 m

Sun Odyssey 389's aft cabin

Maximum headroom
6’ 2”1.9 m
Berth length
6’ 7”2.02 m
Berth width
5’ 2”1.58 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more