Boat-Specs.com

Sailboat specifications and datasheets

Sun Odyssey 32i deep draft

The Sun Odyssey 32i, here in "deep draft" version, is a 31’ monohull sailboat designed by Philippe Briand. She was built by Jeanneau (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 2005 and 2008.

The Sun Odyssey 32i belongs to the Sun Odyssey range. The Sun Odyssey 32i is as well listed, on Boat-Specs.com, in version Shoal draft, Performance and Keel and centerboard.

Jeanneau Sun Odyssey 32i Jeanneau Sun Odyssey 32i sailplanJeanneau Sun Odyssey 32i layoutJeanneau Sun Odyssey 32i sailingJeanneau Sun Odyssey 32i sailingJeanneau Sun Odyssey 32i accommodations
Sun Odyssey 32i's   Main Features
Model Sun Odyssey 32i
Version Deep draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Philippe Briand
Range Sun Odyssey
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 2005
Last built hull 2008
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
EC certification B
Standard public price ex. VAT (indicative only) N/A
Sun Odyssey 32i's   Main dimensions
Length overall 31’ 6”
Hull length 31’
Waterline length 28’
Beam (width) 10’ 10”
Draft 6’ 7”
Mast height from DWL 46’ 7”
Light displacement 9480 lbs
Ballast weight 2491 lbs
Ballast type Cast iron
Sun Odyssey 32i's   Rig and sails
Upwind sail area 541 sq.ft
Downwind sail area 939 sq.ft
Mainsail area 270 sq.ft
Genoa area 271 sq.ft
Symetric spinnaker area 668 sq.ft
Rigging type Sloop Marconi fractional
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 40’ 11”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 11”
PiMainsail hoist measurement (from tack to head) 36’ 7”
EiMainsail foot measurement (from tack to clew) 13’ 2”
Sun Odyssey 32i's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
19.02
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
32.98
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
197
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
26 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.08 knots
Sun Odyssey 32i's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 21 HP
Fuel type Diesel
Fuel tank capacity 18.5 gal
Sun Odyssey 32i's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 44.9 gal
Water heater capacity 5.3 gal
Holding tank capacity 13.2 gal
Fridge/ice-box capacity 31.7 gal
Maximum headroom 6’ 1”
Galley headroom 6’
Sun Odyssey 32i's   Saloon
Maximum headroom 6’
Sun Odyssey 32i's   Fore cabin
Maximum headroom 6’ 1”
Berth length 6’ 8”
Berth width 5’ 2”
Sun Odyssey 32i's   Aft cabin
Maximum headroom 5’ 11”
Berth length 6’ 8”
Berth width 6’ 1”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Sun Odyssey 33i Performance32’2008
Bénéteau 323 Shoal draft32’2003
Océanis 323 Clipper Shoal draft32’2003
Bénéteau 31 Deep draft30’ 6”2007
Océanis 31 Deep draft30’ 6”2007
Hallberg-Rassy 31030’ 11”2009
Sun Odyssey 30i Performance28’ 10”2008
Hallberg-Rassy 31 MkII31’ 7”2006
Sun Odyssey 349 Performance32’ 8”2013
Catalina 309 Fin keel31’2005
Bavaria Cruiser 32 Standard32’2010
Océanis 331 Fin keel32’ 10”1999
Sun Odyssey 319 Fin keel31’2017
Hunter 33 - 2004 Shoal draft33’ 1”2004
Bavaria Cruiser 34 Standard32’2013
^