Boat-Specs.com

Sailboat specifications and datasheets

Sun Odyssey 30i performance

The Sun Odyssey 30i, here in "performance" version, is a 28’10” monohull sailboat designed by Marc Lombard. She was built by Jeanneau (France) and made of monolithic fiberglass / polyester. The production started in 2008 .

The Sun Odyssey 30i belongs to the Sun Odyssey range. The Sun Odyssey 30i is as well listed, on Boat-Specs.com, in version Keel and centerboard and Deep draft.

Jeanneau Sun Odyssey 30i Jeanneau Sun Odyssey 30i sailplanJeanneau Sun Odyssey 30i layoutJeanneau Sun Odyssey 30i sailingJeanneau Sun Odyssey 30i sailingJeanneau Sun Odyssey 30i accommodations
Sun Odyssey 30i's   Main Features
Model Sun Odyssey 30i
Version Performance
Type of hull Monohull
Shipyard
Designer Marc Lombard
Range Sun Odyssey
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 2008
Appendages Keel :
Fin with bulb
Helm 1 tiller
Rudder 1 spade rudder
Unsinkable No
Trailerable No
EC certification B
Standard public price (indicative only) N/A
Sun Odyssey 30i's   Main dimensions
Length overall 29’ 6”
Hull length 28’ 10”
Waterline length 27’ 1”
Beam (width) 10’ 5”
Draft 5’ 8”
Mast height from DWL 47’ 2”
Light displacement 8697 lbs
Ballast weight 2086 lbs
Ballast type Cast iron
Sun Odyssey 30i's   Rig and sails
Upwind sail area 476 sq.ft
Downwind sail area 1059 sq.ft
Mainsail area 252 sq.ft
Genoa area 224 sq.ft
Symetric spinnaker area 807 sq.ft
Rigging type Sloop Marconi 9/10
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 40’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 10’ 7”
PiMainsail hoist measurement (from tack to head) 37’ 8”
EiMainsail foot measurement (from tack to clew) 11’ 10”
Sun Odyssey 30i's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
17.70
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
39.41
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
198
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
24 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.98 knots
Sun Odyssey 30i's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 21 HP
Fuel type Diesel
Fuel tank capacity 13.2 gal
Sun Odyssey 30i's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 42.3 gal
Holding tank capacity 22.5 gal
Fridge/ice-box capacity 26.4 gal
Galley headroom 6’ 1”
Sun Odyssey 30i's   Saloon
Maximum headroom 6’
Sun Odyssey 30i's   Fore cabin
Maximum headroom 6’
Berth length 6’ 11”
Berth width 6’
Sun Odyssey 30i's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 4”
Berth width 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Sun Odyssey 30i Keel and centerboard28’ 10”2008
Sun Odyssey 32i Deep draft31’2005
Sun Odyssey 32i Shoal draft31’2005
Sun Odyssey 32i Performance31’2005
Sun Odyssey 32i Keel and centerboard31’2005
Sun Fast 32i31’2001
Sun Odyssey 319 Fin keel31’2017
Sun Odyssey 29.2 Keel and centerboard27’ 11”1997
Sun Odyssey 29.2 Deep draft27’ 11”1997
Sun Odyssey 33i Performance32’2008
Sun Odyssey 33i Keel and centerboard32’2008
Sun Odyssey 33i Shoal draft32’2008
Océanis 31 Deep draft30’ 6”2007
Océanis 31 Shoal draft30’ 6”2007
Bénéteau 31 Deep draft30’ 6”2007
Bénéteau 31 Shoal draft30’ 6”2007
Elan 310 Standard30’ 4”2009
Hallberg-Rassy 31030’ 11”2009
First 27.7 Shoal draft27’ 2”2002
First 27.7 Lifting keel27’ 2”2002
^