Boat-Specs.com

Sailboat specifications and datasheets

Sun Odyssey 30i keel and centerboard

The Sun Odyssey 30i, here in "keel and centerboard" version, is a 28’10” monohull sailboat designed by Marc Lombard. She was built by Jeanneau (France) and made of monolithic fiberglass / polyester. The production started in 2008 .

The Sun Odyssey 30i belongs to the Sun Odyssey range. The Sun Odyssey 30i is as well listed, on Boat-Specs.com, in version Performance and Deep draft.

Jeanneau Sun Odyssey 30i Jeanneau Sun Odyssey 30i sailplanJeanneau Sun Odyssey 30i layoutJeanneau Sun Odyssey 30i sailingJeanneau Sun Odyssey 30i sailingJeanneau Sun Odyssey 30i accommodations
Sun Odyssey 30i's   Main Features
Model Sun Odyssey 30i
Version Keel and centerboard
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Marc Lombard
Range Sun Odyssey
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 2008
Last built hull Discontinued
Appendages Centerboard :
Centerboard in the keel
Helm 1 tiller
Rudder 2 spade rudders
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification B
Standard public price ex. VAT (indicative only) N/A
Sun Odyssey 30i's   Main dimensions
Length overall 29’ 6”
Hull length 28’ 10”
Waterline length 27’ 1”
Beam (width) 10’ 5”
Draft 2’ 10”
Draft when appendages up 6’ 7”
Mast height from DWL 47’ 2”
Light displacement 8907 lbs
Ballast weight 2291 lbs
Ballast type Cast iron exterior ballast with steel centerboard
Sun Odyssey 30i's   Rig and sails
Upwind sail area 463 sq.ft
Downwind sail area 1046 sq.ft
Mainsail area 239 sq.ft
Genoa area 224 sq.ft
Symetric spinnaker area 807 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 40’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 10’ 7”
PiMainsail hoist measurement (from tack to head) 37’ 8”
EiMainsail foot measurement (from tack to clew) 11’ 10”
Sun Odyssey 30i's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
16.95
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
38.32
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
203
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
26 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.98 knots
Sun Odyssey 30i's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 21 HP
Fuel type Diesel
Fuel tank capacity 13.2 gal
Sun Odyssey 30i's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 42.3 gal
Holding tank capacity 22.5 gal
Fridge/ice-box capacity 26.4 gal
Galley headroom 6’ 1”
Sun Odyssey 30i's   Saloon
Maximum headroom 6’
Sun Odyssey 30i's   Fore cabin
Maximum headroom 6’
Berth length 6’ 11”
Berth width 6’
Sun Odyssey 30i's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 4”
Berth width 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Sun Odyssey 32i Keel and centerboard31’2005
Sun Odyssey 32i Shoal draft31’2005
Sun Odyssey 32i Performance31’2005
Sun Odyssey 29.2 Keel and centerboard27’ 11”1997
Océanis 31 Shoal draft30’ 6”2007
Sun Odyssey 33i Shoal draft32’2008
Sun Odyssey 33i Keel and centerboard32’2008
Sun Odyssey 349 Shoal draft32’ 8”2013
Sun Odyssey 349 Lifting keel32’ 8”2013
Océanis 323 Clipper Deep draft32’2003
Océanis 35 Keel and centerboard32’ 8”2014
Océanis 35 Shoal draft32’ 8”2014
Océanis 311 Keel and centerboard31’ 2”1997
Océanis 35.1 Keel and centerboard32’ 8”2016
Océanis 35.1 Shoal draft32’ 8”2016
^