Boat-Specs.com

Sailboat specifications and datasheets

Sun Légende 41 regatta

The Sun Légende 41, here in "regatta" version, is a 40’2” offshore monohull sailboat designed by Douglas Peterson. She was built by Jeanneau (France) and made of monolithic fiberglass (Kevlar optionnal) / polyester. This sailboat was produced between 1985 and 1994 with 548 hulls completed.

The Sun Légende 41 is as well listed, on Boat-Specs.com, in version Fin keel and Keel and centerboard.

Jeanneau Sun Légende 41 Jeanneau Sun Légende 41 sailplanJeanneau Sun Légende 41 layoutJeanneau Sun Légende 41 sailingJeanneau Sun Légende 41 sailingJeanneau Sun Légende 41 sailingJeanneau Sun Légende 41 sailingJeanneau Sun Légende 41 sailingJeanneau Sun Légende 41 cockpitJeanneau Sun Légende 41 accommodationsJeanneau Sun Légende 41 accommodationsJeanneau Sun Légende 41 accommodationsJeanneau Sun Légende 41 accommodations
Sun Légende 41's   Main Features
Model Sun Légende 41
Version Regatta
Type of hull Monohull
Category Offshore cruiser-racer sailboat
Shipyard
Designer Douglas Peterson
Construction Hull:
monolithic fiberglass (Kevlar optionnal) / polyester
Deck:
sandwich balsa / fiberglass / polyester
First built hull 1985
Last built hull 1994
Number of hulls built 548
Appendages Keel :
Fin without bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
French navigation category 1
Standard public price ex. VAT (indicative only) N/A
Sun Légende 41's   Main dimensions
Length overall 40’ 10”
Hull length 40’ 2”
Waterline length 32’ 8”
Beam (width) 12’ 11”
Draft 6’ 11”
Mast height from DWL 58’ 8”
Light displacement 16094 lbs
Ballast weight 6878 lbs
Ballast type Lead
French customs tonnage 14.23 Tx
Sun Légende 41's   Rig and sails
Upwind sail area 973 sq.ft
Downwind sail area 1655 sq.ft
Mainsail area 371 sq.ft
Genoa area 602 sq.ft
Solent area 379 sq.ft
Jib area 210 sq.ft
Stormjib area 82 sq.ft
Symetric spinnaker area 1284 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging Single-strand (ROD)
Number of levels of spreaders 2
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 52’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 15’ 1”
PiMainsail hoist measurement (from tack to head) 46’ 4”
EiMainsail foot measurement (from tack to clew) 14’ 1”
Sun Légende 41's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
24.02
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
40.87
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
208
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
43 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.67 knots
Sun Légende 41's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 44 HP / 55 HP
Fuel type Diesel
Fuel tank capacity 52.8 gal
Sun Légende 41's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 11
Head(s) (min/max) 1 / 2
Fresh water tank capacity 92.5 gal
Maximum headroom 6’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Sealord 39 Ketch38’ 6”1983
Bénéteau R/C 42 Shoal draft41’ 11”1981
Catalina 380 Tall rig38’ 6”1987
Grand Soleil 43 - J&J Sport42’ 7”1998
X-372 Mast head rigging36’ 4”1987
Catalina 390 Tall rig38’ 8”2001
Catalina 36 MkI Tall rig36’ 4”1982
First 38 S38’ 6”1982
Albin Nimbus 42 Keel and centerboard41’ 4”1981
Albin Nimbus 42 Race41’ 4”1981
Oyster SJ41 Fractionnal rigging39’ 8”1980
Catalina 42 Wing keel41’ 10”1989
Marlow Hunter 40 Furling mainsail40’2013
Catalina 36 MkII Tall rig36’ 4”1994
Swan 42 Shoal draft42’1980
^