Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Rush Shoal draft

Sailboat specifications

The Rush is a 30’2” (9.2m) racer-cruiser sailboat designed by Ron Holland Design (Canada). She was built between 1979 and 1984 by Jeanneau (France) with 583 hulls completed. The Shoal draft version features a shorter keel to grant access to shallow areas.

The Rush is as well listed, on Boat-Specs.com, in Deep draft, Royale TDF and Regatta version (see all the versions compared).

Rush's main features

Model
Rush
Version
Shoal draft
Hull type
Monohull
Category
Racer-cruiser sailboat
Sailboat builder
Sailboat designer
Sailboat collection
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
583
First built hull
1979
Last built hull
1984
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Former French navigation category
2
Standard public price ex. VAT (indicative only)
N/A

Rush's main dimensions

Overall length
31’ 4”9.55 m
Hull length
30’ 2”9.2 m
Waterline length
25’ 5”7.75 m
Beam (width)
10’ 4”3.15 m
Draft
4’ 7”1.4 m
Mast height from DWL
47’ 2”14.38 m
Light displacement (MLC)
7055 lb3200 kg
Ballast weight
2513 lb1140 kg
Ballast type
Cast iron
French customs tonnage
7.23 Tx

Rush's rig and sails

Upwind sail area
527 ft²49 m²
Downwind sail area
921 ft²85.6 m²
Mainsail area
179 ft²16.6 m²
Genoa area
349 ft²32.4 m²
Solent area
280 ft²26 m²
Jib area
147 ft²13.7 m²
Stormjib area
75 ft²7 m²
Symmetric spinnaker area
743 ft²69 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
34’ 5”10.5 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 11”3.62 m
P
 iMainsail hoist measurement (from tack to head)
32’ 6”9.91 m
E
 iMainsail foot measurement (from tack to clew)
10’3.05 m
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Rush's performances

HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
16.5
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
243 ft²/T22.56 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
424 ft²/T39.42 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
195
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
36 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.76 knots

Rush's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
8 HP / 18 HP
Fuel type
Diesel
Fuel tank capacity
7.4 gal28 liters

Rush's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
1
Berth(s)
5
Head(s)
1
Freshwater tank capacity
23.8 gal90 liters
Fridge/ice-box capacity
25.1 gal95 liters
Maximum headroom
6’ 1”1.87 m
Galley headroom
6’ 1”1.87 m
Head headroom
5’ 8”1.75 m

Rush's saloon

Saloon table length
3’ 7”1.1 m
Saloon table width
3’ 4”1 m
Berth width
6’ 1”1.85 m

Rush's fore cabin

Maximum headroom
5’ 2”1.6 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Suspens Fin keel (Archambault)
1979
30’ 4”9.25 m
Elite 326 Shoal draft (Kirié)
1987
31’ 4”9.55 m
Bénéteau R/C 32 Shoal draft (Bénéteau)
1980
31’ 6”9.6 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Elan S3 Shoal draft (Elan Yachts)
2016
30’ 4”9.25 m
Aquila Shoal draft (Jeanneau)
1975
27’ 2”8.28 m
Attalia 32 Deep draft (Jeanneau)
1983
30’ 2”9.2 m
First 32 Shoal draft (Bénéteau)
1980
31’ 6”9.6 m
First 29 Shoal draft (Bénéteau)
1983
28’ 6”8.7 m
First 305 Shoal draft (Bénéteau)
1984
30’ 8”9.35 m
Etap 30 Shoal draft (Etap)
1984
29’ 8”9.05 m
First 30E Shoal draft (Bénéteau)
1981
30’ 4”9.25 m
First 31.7 Shoal draft (Bénéteau)
1997
31’ 2”9.5 m
Rush Deep draft (Jeanneau)
1979
30’ 2”9.2 m
Feeling 326 Shoal draft (Kirié)
1987
31’ 4”9.55 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more