Boat-Specs.com

Sailboat specifications and datasheets

Jeanneau 64 shoal draft

The Jeanneau 64, here in "shoal draft" version, is a 64’1” monohull sailboat designed by Philippe Briand and Design Office Jeanneau. She was built by Jeanneau (France) and made of sandwich balsa / fiberglass / vinylester (composite infusion). The production started in 2014 .

The Jeanneau 64 belongs to the Jeanneau Yachts range. The Jeanneau 64 is as well listed, on Boat-Specs.com, in version Standard.

Jeanneau 64 Jeanneau 64 sailplanJeanneau 64 layoutJeanneau 64 layoutJeanneau 64 layoutJeanneau 64 sailingJeanneau 64 sailingJeanneau 64 sailingJeanneau 64 sailingJeanneau 64 sailingJeanneau 64 accommodationsJeanneau 64 accommodationsJeanneau 64 accommodationsJeanneau 64 accommodationsJeanneau 64 accommodations
Jeanneau 64's   Main Features
Model Jeanneau 64
Version Shoal draft
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Philippe Briand
Design Office Jeanneau
Range Jeanneau Yachts
Construction Hull and deck:
sandwich balsa / fiberglass / vinylester (composite infusion)
First built hull 2014
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) About
925 000
(2017)
Jeanneau 64's   Main dimensions
Length overall 65’ 11”
Hull length 64’ 1”
Waterline length 59’ 1”
Beam (width) 17’ 8”
Draft 7’ 2”
Mast height from DWL 95’ 6”
Light displacement 70989 lbs
Maximum displacement 81571 lbs
Capacity 10582 lbs
Ballast weight 23259 lbs
Ballast type Cast iron
Jeanneau 64's   Rig and sails
Upwind sail area 2250 sq.ft
Downwind sail area 4381 sq.ft
Mainsail area 1152 sq.ft
Genoa area 1098 sq.ft
Jib area 861 sq.ft
Symetric spinnaker area 3229 sq.ft
Asymetric spinnaker area 3229 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging Dyform discontinuous
Number of levels of spreaders 3
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 82’
JiFore triangle base (from mast foot to bottom of forestay) 24’ 10”
PiMainsail hoist measurement (from tack to head) 78’ 8”
EiMainsail foot measurement (from tack to clew) 24’ 11”
Jeanneau 64's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
20.65
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
40.21
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
156
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
33 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
10.30 knots
Jeanneau 64's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 180 HP
Fuel type Diesel
Fuel tank capacity 217.9 gal
Jeanneau 64's   Accommodation
Cabin(s) (min/max) 3 / 6
Berth(s) (min/max) 6 / 14
Fresh water tank capacity 264.2 gal
Water heater capacity 21.1 gal
Holding tank capacity 69.7 gal
Fridge/ice-box capacity 95.1 gal
Jeanneau 64's   Fore cabin
Berth length 6’ 8”
Berth width 5’ 11”
Jeanneau 64's   Aft cabin
Berth length 6’ 8”
Berth width 5’ 2”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Oceanis Yachts 62 Shoal draft59’ 6”2016
Oyster 675 Keel and centerboard65’ 4”2014
Océanis 60 Shoal draft58’ 2”2015
Jeanneau 58 Shoal draft56’ 8”2009
Jeanneau 57 Shoal draft56’ 8”2009
Hanse 675 Shoal draft67’ 4”2015
Sense 57 Shoal draft55’ 1”2016
Sense 55 Shoal draft55’ 1”2011
Centurion 57 Deep draft58’ 1”2014
Centurion 57 Shoal draft58’ 1”2014
Hanse 630e Shoal draft62’ 4”2006
Jeanneau 54 Shoal draft51’ 8”2015
Océanis 55 Shoal draft52’ 6”2012
Océanis 55.1 Shoal draft52’ 6”2017
Océanis 55.1 Wing keel52’ 6”2017
^