Boat-Specs.com

Sailboat specifications and datasheets

Brin de folie deep draft

The Brin de folie, here in "deep draft" version, is a 29’6” monohull sailboat designed by Philippe Harlé and Jean Marie Finot. She was built by Jeanneau (France) and made of GRP (glass reinforced polyester). This sailboat was produced between 1975 and 1979 with 820 hulls completed.

The Brin de folie is as well listed, on Boat-Specs.com, in version Standard.

Jeanneau Brin de folie Jeanneau Brin de folie sailplanJeanneau Brin de folie layoutJeanneau Brin de folie sailingJeanneau Brin de folie accommodationsJeanneau Brin de folie accommodations
Brin de folie's   Main Features
Model Brin de folie
Version Deep draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Philippe Harlé
Jean Marie Finot
Construction GRP (glass reinforced polyester)
First built hull 1975
Last built hull 1979
Number of hulls built 820
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 1 semi-spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
French navigation category 2
Standard public price ex. VAT (indicative only) N/A
Brin de folie's   Main dimensions
Hull length 29’ 6”
Waterline length 22’ 1”
Beam (width) 9’ 10”
Draft 5’ 5”
Light displacement 5512 lbs
Ballast weight 2205 lbs
Ballast type Cast iron
French customs tonnage 7.26 Tx
Brin de folie's   Rig and sails
Upwind sail area 474 sq.ft
Downwind sail area 845 sq.ft
Mainsail area 156 sq.ft
Genoa area 318 sq.ft
Jib area 151 sq.ft
Stormjib area 59 sq.ft
Symetric spinnaker area 689 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle 0 °
Brin de folie's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
23.89
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
42.62
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
230
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
40 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.31 knots
Brin de folie's   Auxiliary engine
Engine(s) 1
Engine type Outboard or inboard engine
Engine (min/max) 10 HP / 11 HP
Fuel type Diesel for inboard engine, Gas for outboard
Brin de folie's   Accommodation
Cabin(s) 1
Berth(s) (min/max) 6 / 7
Head(s) 1
Fresh water tank capacity 23.8 gal
Maximum headroom 6’ 1”
Head headroom 4’ 7”
Brin de folie's   Saloon
Maximum headroom 6’ 1”
Saloon table length 3’ 7”
Saloon table width 2’ 8”
Brin de folie's   Fore cabin
Maximum headroom 5’ 1”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Symphonie Keel and centerboard31’ 2”1978
Symphonie Shoal draft31’ 2”1978
Super Daïmio Shoal draft27’ 7”1975
Moody 31 MkI Twin keel30’ 8”1983
Bénéteau R/C 32 Deep draft31’ 6”1980
Fulmar 32 Twin keel31’ 10”1980
Feeling 960 Shoal draft31’ 6”1986
Trident 80 Deep draft26’ 2”1975
Elite 324 Shoal draft31’ 6”1986
Bénéteau R/C 27 Deep draft26’ 1”1978
Griffon 26 Twin keel26’1979
Fantasia 27 Twin keel25’ 4”1982
Sun Liberty 34 Shoal draft32’ 8”1989
Grand Soleil 34 Shoal draft33’ 6”1974
Westerly Renown Ketch31’ 2”1972
^