Boat-Specs.com

Sailboat specifications and datasheets

Italia 10.98

The Italia 10.98 is a 36’ monohull sailboat designed by Maurizio Cossutti. She was built by Italia Yachts (Italy) and made of sandwich PVC / E-glass / vinylester with carbon fiber reinforcements. The production started in 2011 .
Italia Yachts  Italia 10.98 Italia Yachts  Italia 10.98 sailplanItalia Yachts  Italia 10.98 layoutItalia Yachts  Italia 10.98 layoutItalia Yachts  Italia 10.98 sailingItalia Yachts  Italia 10.98 sailingItalia Yachts  Italia 10.98 sailingItalia Yachts  Italia 10.98 sailingItalia Yachts  Italia 10.98 cockpitItalia Yachts  Italia 10.98 accommodationsItalia Yachts  Italia 10.98 accommodationsItalia Yachts  Italia 10.98 accommodationsItalia Yachts  Italia 10.98 accommodationsItalia Yachts  Italia 10.98 accommodations
Italia 10.98's   Main Features
Model Italia 10.98
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Maurizio Cossutti
Construction Hull and deck:
sandwich PVC / E-glass / vinylester with carbon fiber reinforcements
First built hull 2011
Last built hull Still in production
Appendages Keel :
T-shaped keel (with bulb)
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
175 000
(2017)
Italia 10.98's   Main dimensions
Length overall 37’
Hull length 36’
Waterline length 31’ 8”
Beam (width) 12’
Draft 6’ 2”
Light displacement 10582 lbs
Ballast weight 3307 lbs
Ballast type Steel fin with lead bulb
Italia 10.98's   Rig and sails
Upwind sail area 775 sq.ft
Downwind sail area 1453 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire discontinuous
Number of levels of spreaders 2
Spreaders angle Swept-back
Italia 10.98's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.30
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
47.44
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
151
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
31 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.54 knots
Italia 10.98's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 20 HP / 30 HP
Fuel type Diesel
Fuel tank capacity 29.1 gal
Italia 10.98's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) 1
Fresh water tank capacity 52.8 gal
Maximum headroom 6’ 7”
Italia 10.98's   Fore cabin
Berth length 6’ 8”
Berth width (head/feet) 5’ 8”
2’ 1”
Italia 10.98's   Aft cabin
Berth length 6’ 7”
Berth width (head/feet) 4’ 8”
3’ 10”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Dufour 36 Performance36’ 1”2012
Salona 37 Medium draft37’2006
Elan 350 Standard34’ 10”2011
Salona 38 Shoal draft37’ 8”2011
J/11S35’ 10”2016
First 35 - Farr Deep draft35’2010
Grand Soleil 40 - B&C Standard36’ 6”2006
J/112e36’ 1”2015
Elan E4 Standard34’ 10”2016
Dehler 35SQ Standard34’ 6”2012
Salona 380 Standard38’ 1”2016
Dehler 38 Standard37’ 1”2012
Elan 380 Standard37’ 2”2008
X-37 Standard37’ 2”2004
Grand Soleil 37 - B&C Deep draft37’ 1”2005
^