Boat-Specs.com

Sailboat specifications and datasheets

Mojito 1088 swing keel

The Mojito 1088, here in "swing keel" version, is a 36’1” monohull sailboat designed by Pierre Rolland. She was built by IDB Marine (France) and made of sandwich foam / fiberglass / polyester (vacuum infusion). The production started in 2018 .

The Mojito 1088 belongs to the Mojito range.

Find out more about the Mojito 1088 on Boat-Spec's blog: European Yacht of the Year 2019 nominated sailboats

IDB Marine  Mojito 1088 IDB Marine  Mojito 1088 layoutIDB Marine  Mojito 1088 layoutIDB Marine  Mojito 1088 sailingIDB Marine  Mojito 1088 sailingIDB Marine  Mojito 1088 sailingIDB Marine  Mojito 1088 sailingIDB Marine  Mojito 1088 sailingIDB Marine  Mojito 1088 accommodations
Mojito 1088's   Main Features
Model Mojito 1088
Version Swing keel
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Pierre Rolland
Range Mojito
Construction Hull and deck:
sandwich foam / fiberglass / polyester (vacuum infusion)
First built hull 2018
Last built hull Still in production
Appendages Keel (lifting) :
Swing keel
Helm 1 tiller
Rudder 2 spade rudders
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
168 000
(2019)
Mojito 1088's   Main dimensions
Hull length 36’ 1”
Waterline length 35’ 10”
Beam (width) 13’ 1”
Draft 9’ 2”
Draft when appendages up 3’ 7”
Light displacement 8818 lbs
Ballast weight 3307 lbs
Ballast type Cast iron
Mojito 1088's   Rig and sails
Upwind sail area 797 sq.ft
Downwind sail area 1625 sq.ft
Mainsail area 441 sq.ft
Genoa area 355 sq.ft
Solent area 269 sq.ft
Asymmetric spinnaker area 1184 sq.ft
Rigging type Sloop Marconi fractional
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire discontinuous
Number of levels of spreaders 2
Spreaders angle Swept-back
Mojito 1088's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
29.37
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
59.92
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
87
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
38 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.01 knots
Mojito 1088's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 30 HP
Fuel type Diesel
Fuel tank capacity 15.9 gal
Mojito 1088's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) 1
Fresh water tank capacity 84.5 gal
Fridge/ice-box capacity 14.8 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Malango 1088 Swing keel36’ 1”2017
Malango 1045 Swing keel34’ 4”2013
Océanis 38.1 Deep draft36’ 6”2016
Sun Odyssey 389 Deep draft36’2015
Océanis 38 Deep draft36’ 6”2013
Catalina 385 Fin keel34’ 10”2012
Océanis 41.1 Deep draft39’ 4”2015
Sun Odyssey 379 Deep draft36’2011
Sun Odyssey 490 Deep draft39’ 5”2017
JPK 38 Fast Cruiser Fin keel37’ 4”2012
Hallberg-Rassy 34034’2017
Bavaria Cruiser 37 Standard35’ 10”2014
Dufour 390 Grand Large Standard36’ 8”2018
Pogo 10.50 Swing keel34’ 5”2007
Malango 999 Swing keel32’ 10”2009
^