Boat-Specs.com

Sailboat specifications and datasheets

Ice 60 standard

The Ice 60, here in "standard" version, is a 55’1” monohull sailboat designed by Umberto Felci. She was built by Ice Yachts (Italy) and made of sandwich PVC / carbon fiber / epoxy (composite infusion). The production started in 2018 .

The Ice 60 is as well listed, on Boat-Specs.com, in version RS.

Ice Yachts Ice 60 Ice Yachts Ice 60 sailplanIce Yachts Ice 60 layoutIce Yachts Ice 60 layoutIce Yachts Ice 60 sailingIce Yachts Ice 60 sailingIce Yachts Ice 60 sailingIce Yachts Ice 60 sailingIce Yachts Ice 60 sailingIce Yachts Ice 60 sailingIce Yachts Ice 60 accommodationsIce Yachts Ice 60 accommodationsIce Yachts Ice 60 accommodationsIce Yachts Ice 60 accommodationsIce Yachts Ice 60 accommodations
Ice 60's   Main Features
Model Ice 60
Version Standard
Type of hull Monohull
Category Offshore racer-cruiser sailboat
Shipyard
Designer Umberto Felci
Construction Hull and deck:
sandwich PVC / carbon fiber / epoxy (composite infusion)
First built hull 2018
Last built hull Still in production
Appendages Keel :
Fin with bulb
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Ice 60's   Main dimensions
Length overall 59’
Hull length 55’ 1”
Waterline length 55’ 1”
Beam (width) 17’ 1”
Draft 9’ 5”
Light displacement 39463 lbs
Ballast weight 13448 lbs
Ice 60's   Rig and sails
Upwind sail area 2368 sq.ft
Downwind sail area 4844 sq.ft
Mainsail area 1399 sq.ft
Jib area 969 sq.ft
Asymetric spinnaker area 3444 sq.ft
Rigging type Sloop Marconi 7/8
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Carbon fiber
Standing rigging Single-strand (ROD) discontinuous
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 82’
JiFore triangle base (from mast foot to bottom of forestay) 20’ 2”
PiMainsail hoist measurement (from tack to head) 81’ 5”
EiMainsail foot measurement (from tack to clew) 25’ 11”
Ice 60's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
32.15
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
65.76
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
107
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
9.95 knots
Ice 60's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 150 HP
Fuel type Diesel
Fuel tank capacity 171.7 gal
Ice 60's   Accommodation
Cabin(s) (min/max) 3 / 4
Berth(s) (min/max) 8 / 10
Head(s) 3
Fresh water tank capacity 264.2 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Xp 55 Standard55’2013
Grand Soleil 54 Standard53’ 7”2007
Ice 52 Medium draft51’ 10”2016
Sense 57 Deep draft55’ 1”2016
Hanse 588 Standard54’ 10”2016
Bavaria C57 Standard53’2017
Sense 55 Deep draft55’ 1”2011
Hanse 575 Standard54’ 10”2012
Dufour 56 Exclusive Standard53’ 6”2016
Swan 60 FD61’ 11”2009
Grand Soleil 52 Long Cruise Deep draft52’ 10”2017
Ice 62 Lifting keel61’ 10”2014
Océanis 55.1 Deep draft52’ 6”2017
Océanis 60 Deep draft58’ 2”2015
Océanis 55 Deep draft52’ 6”2012
^