Boat-Specs.com

Sailboat specifications and datasheets

Hanse 418 shoal draft

The Hanse 418, here in "shoal draft" version, is a 39’4” monohull sailboat designed by Fietje Judel and Rolf E. Vrolijk. She was built by Hanse (Germany) and made of sandwich balsa / fiberglass / polyester. The production started in 2017 .

The Hanse 418 is as well listed, on Boat-Specs.com, in version Medium draft and Furling mainsail.

Hanse 418 Hanse 418 sailplanHanse 418 layoutHanse 418 layoutHanse 418 layoutHanse 418 layoutHanse 418 layoutHanse 418 sailingHanse 418 sailingHanse 418 sailingHanse 418 sailingHanse 418 sailingHanse 418 sailingHanse 418 sailingHanse 418 cockpitHanse 418 accommodationsHanse 418 accommodationsHanse 418 accommodationsHanse 418 accommodations
Hanse 418's   Main Features
Model Hanse 418
Version Shoal draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Fietje Judel
Rolf E. Vrolijk
Construction Hull and deck:
sandwich balsa / fiberglass / polyester
First built hull 2017
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
156 000
(2017)
Hanse 418's   Main dimensions
Length overall 40’ 8”
Hull length 39’ 4”
Waterline length 34’ 1”
Beam (width) 13’ 8”
Draft 5’ 8”
Mast height from DWL 64’ 4”
Light displacement 22267 lbs
Ballast weight 7055 lbs
Ballast type Cast iron
Hanse 418's   Rig and sails
Upwind sail area 936 sq.ft
Downwind sail area 1857 sq.ft
Mainsail area 565 sq.ft
Jib area 371 sq.ft
Asymetric spinnaker area 1292 sq.ft
Code 5 area 818 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle 22 °
IiFore triangle height (from mast foot to fore stay attachment) 54’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 15’ 5”
PiMainsail hoist measurement (from tack to head) 53’ 1”
EiMainsail foot measurement (from tack to clew) 18’ 4”
Hanse 418's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
18.62
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
36.92
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
254
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
32 %
Righting moment @ 1°iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
1953 lbs.ft
Righting moment @ 30°iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
39203 lbs.ft
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.83 knots
Hanse 418's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 39 HP / 57 HP
Fuel type Diesel
Fuel tank capacity 42.3 gal
Hanse 418's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 125.5 gal
Water heater capacity 5.3 gal
Holding tank capacity 17.2 gal
Fridge/ice-box capacity 34.3 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hanse 418 Furling mainsail39’ 4”2017
Hanse 415 Shoal draft39’ 4”2012
Hanse 388 Shoal draft36’ 1”2017
Marlow Hunter 42 SS Deep draft40’2017
Hanse 388 Furling mainsail36’ 1”2017
Marlow Hunter 40 Deep draft40’2013
Marlow Hunter 37 Deep draft37’ 6”2014
Dehler 42 Shoal draft40’ 8”2016
Catalina 390 Wing keel38’ 8”2001
Delphia 40.3 Keel and centerboard39’ 2”2009
Delphia 40.3 Shoal draft39’ 2”2009
Hanse 400 Epoxy39’ 4”2006
Dehler 38 Shoal draft37’ 1”2012
Dehler 42 Competition40’ 8”2016
Impression 40 Shoal draft37’ 8”2014
^