Sailboat specifications and datasheets

Hallberg-Rassy 94 Kutter

The Hallberg-Rassy 94 Kutter is a 30’10” monohull sailboat designed by Olle Enderlein and Christoph Rassy. She was built by Hallberg-Rassy (Sweden) and made of monolithic fiberglass / polyester. This sailboat was produced between 1981 and 1994 with 195 hulls completed.
Hallberg-Rassy 94 Kutter Hallberg-Rassy 94 Kutter sailplanHallberg-Rassy 94 Kutter layoutHallberg-Rassy 94 Kutter layoutHallberg-Rassy 94 Kutter sailingHallberg-Rassy 94 Kutter sailingHallberg-Rassy 94 Kutter sailingHallberg-Rassy 94 Kutter sailingHallberg-Rassy 94 Kutter accommodationsHallberg-Rassy 94 Kutter accommodationsHallberg-Rassy 94 Kutter accommodationsHallberg-Rassy 94 Kutter accommodations
Hallberg-Rassy 94 Kutter's   Main Features
Model Hallberg-Rassy 94 Kutter
Type of hull Monohull
Category Motorsailer
Designer Olle Enderlein
Christoph Rassy
Construction Hull:
monolithic fiberglass / polyester
sandwich foam / fiberglass / polyester
First built hull 1981
Last built hull 1994
Number of hulls built 195
Appendages Keel :
Long keel
Helm 1 tiller (helm wheel in option)
Rudder 1 rudder on skeg
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) N/A
Hallberg-Rassy 94 Kutter's   Main dimensions
Hull length 30’ 10”
Beam (width) 10’ 8”
Draft 3’ 10”
Mast height from DWL 36’ 10”
Light displacement 11464 lbs
Ballast weight 3968 lbs
Ballast type Cast iron
Hallberg-Rassy 94 Kutter's   Rig and sails
Upwind sail area 366 sq.ft
Mainsail area 161 sq.ft
Genoa area 205 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle 0 °
Hallberg-Rassy 94 Kutter's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
35 %
Hallberg-Rassy 94 Kutter's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 43 HP
Fuel type Diesel
Fuel tank capacity 39.6 gal
Hallberg-Rassy 94 Kutter's   Accommodation
Cabin(s) 1
Berth(s) (min/max) 2 / 4
Head(s) 1
Fresh water tank capacity 39.6 gal
Fridge/ice-box capacity 18.5 gal
Hallberg-Rassy 94 Kutter's   Saloon
Saloon table width (min/max) 2’ 6” / 3’ 4”
Berth length 6’ 7”
Hallberg-Rassy 94 Kutter's   Fore cabin
Berth length 6’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hallberg-Rassy 312 MkI30’ 11”1979
Hallberg-Rassy 2626’ 1”1978
Delphia 31 Deep draft31’ 1”2012
Evasion 29 Fin keel28’ 11”1981
Océanis 300 Shoal draft30’1991
A3131’ 4”2009
Hallberg-Rassy 3838’1977
Hobie 3333’ 1”1982
First 310 Deep draft30’1990
Idylle 8.80 Fin keel27’ 11”1982
Evasion 34 Fin keel33’ 11”1980
Konsort Duo 2928’ 11”1985
Delphia 34 Fin keel32’ 7”2014
Bénéteau R/C 32 Shoal draft31’ 6”1980
First 32 Shoal draft31’ 6”1980