Boat-Specs.com

Sailboat specifications and datasheets

RM 1370 twin keel

The RM 1370, here in "twin keel" version, is a 44’11” monohull sailboat designed by Marc Lombard. She was built by Fora Marine (France) and made of plywood with fiberglass / epoxy with galvanised steel frame. The production started in 2017 .

The RM 1370 belongs to the RM range. The RM 1370 is as well listed, on Boat-Specs.com, in version Fin keel and Swing keel.

Find out more about the RM 1370 on Boat-Spec's blog: New sailboats 2017 - France 1/2

Fora Marine RM 1370 Fora Marine RM 1370 layoutFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 sailingFora Marine RM 1370 accommodationsFora Marine RM 1370 accommodationsFora Marine RM 1370 accommodationsFora Marine RM 1370 accommodations
RM 1370's   Main Features
Model RM 1370
Version Twin keel
Type of hull Monohull
Category Offshore fast cruising sailboat
Shipyard
Designer Marc Lombard
Range RM
Construction Hull:
Plywood with fiberglass / epoxy with galvanised steel frame
Deck:
sandwich PVC / fiberglass / polyester
First built hull 2017
Last built hull Still in production
Appendages Twin keel :
Twin asymetric fin with bulb
Helm 2 wheels
Rudder 1 spade rudder (Double as option)
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
293 000
(2017)
RM 1370's   Main dimensions
Length overall 48’ 5”
Hull length 44’ 11”
Waterline length 42’ 8”
Beam (width) 14’ 10”
Draft 6’ 5”
Mast height from DWL 67’ 4”
Light displacement 21612 lbs
Maximum displacement 29183 lbs
Capacity 7571 lbs
Ballast weight 6614 lbs
RM 1370's   Rig and sails
Upwind sail area 1259 sq.ft
Downwind sail area 2470 sq.ft
Mainsail area 587 sq.ft
Genoa area 673 sq.ft
Staysail area 307 sq.ft
Asymetric spinnaker area 1884 sq.ft
Rigging type Cutter Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire discontinuous
Number of levels of spreaders 2
Spreaders angle Swept-back
RM 1370's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.54
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
50.10
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
126
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
31 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.75 knots
RM 1370's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 75 HP
Fuel type Diesel
Fuel tank capacity 92.5 gal
RM 1370's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 6 / 8
Head(s) 2
Fresh water tank capacity 158.5 gal
Holding tank capacity 29.1 gal
Chart table 3’ 2” x 1’ 10”
Maximum headroom 6’ 6”
Head headroom 6’ 4”
RM 1370's   Saloon
Maximum headroom 6’ 4”
Saloon table length 4’ 1”
Saloon table width 2’ 5”
Berth length 6’ 7”
Berth width 2’ 1”
RM 1370's   Fore cabin
Maximum headroom 6’ 4”
Berth length 6’ 7”
Berth width 5’ 1”
RM 1370's   Aft cabin
Maximum headroom 7’
Berth length 6’ 7”
Berth width 4’ 6”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
RM 1360 Twin keel44’ 7”2013
RM 1270 Twin keel39’ 10”2015
Grand Soleil 46 Long Cruise Cruising45’ 11”2014
Dufour 45 Standard44’ 7”2008
Xc 45 Standard45’ 6”2008
JPK 45 Fin keel45’ 4”2016
RM 120039’ 4”2003
Dehler 46 Standard45’ 10”2014
Grand Soleil 47 Cruising46’ 7”2012
Italia 13.9845’ 11”2012
Elan E6 Standard44’ 7”2017
Xp 44 Standard43’ 7”2011
Bavaria Cruiser 51 Standard46’ 4”2016
Dufour 460 Grand Large44’ 4”2016
Catalina 425 Fin keel43’ 6”2016
^