Boat-Specs.com

Sailboat specifications and datasheets

RM 1070 swing keel

The RM 1070, here in "swing keel" version, is a 35’1” monohull sailboat designed by Marc Lombard. She was built by Fora Marine (France) and made of plywood with fiberglass / epoxy with galvanised steel frame. The production started in 2015 .

The RM 1070 belongs to the RM range. The RM 1070 is as well listed, on Boat-Specs.com, in version Twin keel and Fin keel.

Fora Marine RM 1070 Fora Marine RM 1070 layoutFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 sailingFora Marine RM 1070 accommodationsFora Marine RM 1070 accommodationsFora Marine RM 1070 accommodationsFora Marine RM 1070 detail
RM 1070's   Main Features
Model RM 1070
Version Swing keel
Type of hull Monohull
Category Fast cruising sailboat
Shipyard
Designer Marc Lombard
Range RM
Construction Hull:
Plywood with fiberglass / epoxy with galvanised steel frame
Deck:
sandwich PVC / fiberglass / polyester
First built hull 2015
Last built hull Still in production
Appendages Keel (lifting) :
Swing keel
Helm 2 wheels
Rudder 1 spade rudder (Double as option)
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
155 000
(2017)
RM 1070's   Main dimensions
Length overall 37’ 7”
Hull length 35’ 1”
Waterline length 34’ 5”
Beam (width) 13’ 1”
Draft 9’ 7”
Draft when appendages up 3’ 10”
Mast height from DWL 57’ 1”
Light displacement 10803 lbs
Maximum displacement 15873 lbs
Capacity 5071 lbs
Ballast type Cast iron
RM 1070's   Rig and sails
Upwind sail area 831 sq.ft
Downwind sail area 1703 sq.ft
Mainsail area 411 sq.ft
Genoa area 420 sq.ft
Jib area 215 sq.ft
Asymetric spinnaker area 1292 sq.ft
Rigging type Cutter Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum (carbon fiber as an option)
Standing rigging 1x19 strand wire discontinuous
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 50’
JiFore triangle base (from mast foot to bottom of forestay) 13’ 11”
PiMainsail hoist measurement (from tack to head) 46’ 6”
EiMainsail foot measurement (from tack to clew) 15’ 1”
RM 1070's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
26.76
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
54.84
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
120
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.86 knots
RM 1070's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 30 HP / 40 HP
Fuel type Diesel
Fuel tank capacity 21.1 gal
RM 1070's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1
Fresh water tank capacity 52.8 gal
Holding tank capacity 9.2 gal
Chart table 3’ 1” x 1’ 8”
Maximum headroom 6’ 2”
Head headroom 6’ 1”
RM 1070's   Saloon
Maximum headroom 6’ 1”
Saloon table length 4’ 2”
Saloon table width 4’ 4”
Berth length 6’ 11”
Berth width 2’ 2”
RM 1070's   Fore cabin
Maximum headroom 5’ 4”
Berth length 6’ 4”
Berth width 6’ 5”
RM 1070's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 8”
Berth width 4’ 6”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
RM 1070 Fin keel35’ 1”2015
RM 890 Fin keel29’ 2”2013
Xc 38 Shoal draft38’2010
Bavaria Cruiser 37 Shoal draft35’ 10”2014
Sun Fast 3600 Lead keel35’ 5”2013
Dufour 382 Grand Large Shoal draft36’2014
JPK 38 Fast Cruiser Swing keel37’ 4”2012
Salona 33 Medium draft32’ 10”2013
X43 Shoal draft41’2016
X43 Deep draft41’2016
Salona 38 Medium draft37’ 8”2011
Salona 38 Deep draft37’ 8”2011
Bavaria Cruiser 34 Shoal draft32’2013
Easy 9.7 Shoal draft32’2015
Hunter 36 - 2011 Furling mainsail34’ 7”2011
^