Boat-Specs.com

Sailboat specifications and datasheets

Elan 410 standard

The Elan 410, here in "standard" version, is a 40’4” monohull sailboat designed by Rob Humphreys. She was built by Elan Yachts (Slovenia) and made of GRP (glass reinforced polyester). This sailboat was produced between 2007 and 2012.

The Elan 410 is as well listed, on Boat-Specs.com, in version Deep draft.

Elan Yachts  Elan 410 Elan Yachts  Elan 410 layoutElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 sailingElan Yachts  Elan 410 accommodationsElan Yachts  Elan 410 accommodationsElan Yachts  Elan 410 accommodationsElan Yachts  Elan 410 accommodationsElan Yachts  Elan 410 accommodationsElan Yachts  Elan 410 accommodations
Elan 410's   Main Features
Model Elan 410
Version Standard
Type of hull Monohull
Category Offshore cruiser-racer sailboat
Shipyard
Designer Rob Humphreys
Construction GRP (glass reinforced polyester)
First built hull 2007
Last built hull 2012
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Elan 410's   Main dimensions
Length overall 40’ 4”
Hull length 40’ 4”
Waterline length 37’
Beam (width) 12’ 10”
Draft 7’ 2”
Light displacement 18982 lbs
Ballast weight 6127 lbs
Elan 410's   Rig and sails
Upwind sail area 988 sq.ft
Downwind sail area 2216 sq.ft
Mainsail area 543 sq.ft
Genoa area 444 sq.ft
Symetric spinnaker area 1392 sq.ft
Gennaker area 1672 sq.ft
Rigging type Sloop Marconi fractional
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 54’ 8”
JiFore triangle base (from mast foot to bottom of forestay) 15’ 2”
PiMainsail hoist measurement (from tack to head) 53’
EiMainsail foot measurement (from tack to clew) 17’ 10”
Elan 410's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
21.84
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
49.00
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
170
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
32 %
Righting moment @ 30°iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
28209 lbs.ft
Maximum righting momentiThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
37250 lbs.ft @ 55.00 °
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.15 knots
Elan 410's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 40 HP
Fuel type Diesel
Fuel tank capacity 38.3 gal
Elan 410's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 6 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 93.8 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Elan E5 Deep draft39’ 2”2015
First 40 Deep draft40’ 2”2008
Dufour 40E Performance39’ 4”2010
Bavaria Cruiser 41 S39’ 4”2011
Grand Soleil 43 - B&C Deep draft42’ 6”2006
Elan 380 Standard37’ 2”2008
Italia 12.98 Standard41’ 4”2015
Salona 41 Deep draft41’2010
Sun Fast 42 Lead keel40’ 10”1996
First 42s7 Lead keel41’ 8”1994
Dehler 42 Standard40’ 8”2016
X-43 Standard42’ 5”2003
Grand Soleil 43 - Maletto Standard42’ 4”2012
First 40.7 Deep draft39’ 1”1997
J/13343’2004
^