Boat-Specs.com

Sailboat specifications and datasheets

Drakkar 24

The Drakkar 24 is a 23’ coastal monohull sailboat designed by Umberto Felci. She was built by Dufour (France) and made of monolithic fiberglass / polyester. The production started in 2015 .
Dufour Drakkar 24 Dufour Drakkar 24 sailplanDufour Drakkar 24 layoutDufour Drakkar 24 sailingDufour Drakkar 24 sailingDufour Drakkar 24 sailingDufour Drakkar 24 sailingDufour Drakkar 24 sailingDufour Drakkar 24 sailingDufour Drakkar 24 cockpit
Drakkar 24's   Main Features
Model Drakkar 24
Type of hull Monohull
Category Sport keel boat
Shipyard
Designer Umberto Felci
Construction Hull:
monolithic fiberglass / polyester
Deck:
fiberglass / epoxy (injection molding process)
First built hull 2015
Last built hull Still in production
Appendages Keel (lifting) :
Swing keel
Helm 1 tiller
Rudder 1 transom hung rudder
Cockpit Open aft cockpit
Trailerable Yes
EC certification C
Standard public price ex. VAT (indicative only) About
28 000
(2017)
Drakkar 24's   Main dimensions
Hull length 23’
Waterline length 22’ 1”
Beam (width) 8’ 4”
Draft 4’ 11”
Draft when appendages up 0’ 8”
Light displacement 1918 lbs
Ballast weight 661 lbs
Drakkar 24's   Rig and sails
Upwind sail area 287 sq.ft
Downwind sail area 635 sq.ft
Mainsail area 161 sq.ft
Genoa area 126 sq.ft
Jib area 90 sq.ft
Symetric spinnaker area 398 sq.ft
Gennaker area 474 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 24’ 11”
JiFore triangle base (from mast foot to bottom of forestay) 8’ 8”
PiMainsail hoist measurement (from tack to head) 26’ 7”
EiMainsail foot measurement (from tack to clew) 10’ 2”
Drakkar 24's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
29.30
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
64.74
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
80
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.31 knots
Drakkar 24's   Auxiliary engine
Engine(s) 1
Engine type Outboard engine

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Bavaria B/One Race23’ 4”2012
Delphia 24 OD24’2006
M 7.5024’ 7”2015
Monotype 7.5024’ 7”2015
J/7022’ 8”2012
RS Elite24’ 4”2004
Marlow Hunter 2221’ 4”2011
Elan S120’ 10”2015
Elan E120’ 10”2015
J/2222’ 6”1983
Seascape 2726’ 2”2012
First 25 - 2013 Shoal draft24’ 7”2013
Melges 2424’1993
Seascape 2424’2016
Platu 2524’ 6”1992
^