Boat-Specs.com

Sailboat specifications and datasheets

Grand Soleil 45 - Frers standard

The Grand Soleil 45 - Frers, here in "standard" version, is a 44’1” monohull sailboat designed by German Frers. She was built by Cantiere Del Pardo (Italy) and made of GRP (glass reinforced polyester). The production started in 1988 .

The Grand Soleil 45 - Frers belongs to the Grand Soleil range. The Grand Soleil 45 - Frers is as well listed, on Boat-Specs.com, in version Deep draft.

Del Pardo  Grand Soleil 45 - Frers Del Pardo  Grand Soleil 45 - Frers layoutDel Pardo  Grand Soleil 45 - Frers layoutDel Pardo  Grand Soleil 45 - Frers accommodationsDel Pardo  Grand Soleil 45 - Frers accommodations
Grand Soleil 45 - Frers's   Main Features
Model Grand Soleil 45 - Frers
Version Standard
Type of hull Monohull
Category Offshore cruiser-racer sailboat
Shipyard
Designer German Frers
Range Grand Soleil
Construction GRP (glass reinforced polyester)
First built hull 1988
Last built hull Discontinued
Appendages Keel :
Fin without bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) N/A
Grand Soleil 45 - Frers's   Main dimensions
Length overall 45’ 8”
Hull length 44’ 1”
Waterline length 35’ 7”
Beam (width) 13’ 7”
Draft 7’ 2”
Light displacement 24251 lbs
Ballast weight 9480 lbs
Grand Soleil 45 - Frers's   Rig and sails
Upwind sail area 1266 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Grand Soleil 45 - Frers's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
23.78
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
243
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
39 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.00 knots
Grand Soleil 45 - Frers's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 62 HP
Fuel type Diesel
Fuel tank capacity 52.8 gal
Grand Soleil 45 - Frers's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 6 / 8
Head(s) 2
Fresh water tank capacity 100.4 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
First 435 Deep draft44’1984
First 45F5 Standard45’ 7”1990
X-44244’ 4”1993
Swan 441 Cruising44’ 5”1978
Oyster SJ43 Mast head rigging43’ 5”1981
First 456 Deep draft45’ 10”1982
First 42 S / Deep draft41’ 11”1981
Bénéteau R/C 42 S / Deep draft41’ 11”1981
Swan 42 Standard42’1980
Grand Soleil 46.3 Medium draft45’ 11”1997
Grand Soleil 43 - J&J Standard42’ 7”1998
Sun Fast 41 Standard40’ 2”1990
First 42s7 Lead keel41’ 8”1994
Grand Soleil 50 - Peterson Standard49’1993
Albin Nimbus 42 Standard41’ 4”1981
^