Boat-Specs.com

Sailboat specifications and datasheets

Grand Soleil 43 - Maletto shoal draft

The Grand Soleil 43 - Maletto, here in "shoal draft" version, is a 42’4” monohull sailboat designed by Claudio Maletto. She was built by Cantiere Del Pardo (Italy) and made of sandwich fiberglass / polyester (composite infusion). The production started in 2012 .

The Grand Soleil 43 - Maletto belongs to the Grand Soleil range. The Grand Soleil 43 - Maletto is as well listed, on Boat-Specs.com, in version Standard.

Del Pardo  Grand Soleil 43 - Maletto Del Pardo  Grand Soleil 43 - Maletto layoutDel Pardo  Grand Soleil 43 - Maletto layoutDel Pardo  Grand Soleil 43 - Maletto sailingDel Pardo  Grand Soleil 43 - Maletto sailingDel Pardo  Grand Soleil 43 - Maletto sailingDel Pardo  Grand Soleil 43 - Maletto sailingDel Pardo  Grand Soleil 43 - Maletto sailingDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto accommodationsDel Pardo  Grand Soleil 43 - Maletto detail
Grand Soleil 43 - Maletto's   Main Features
Model Grand Soleil 43 - Maletto
Version Shoal draft
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Claudio Maletto
Range Grand Soleil
Construction Hull and deck:
sandwich fiberglass / polyester (composite infusion)
First built hull 2012
Last built hull Still in production
Appendages Keel :
Fin with bulb
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
264 000
(2017)
Grand Soleil 43 - Maletto's   Main dimensions
Length overall 43’ 6”
Hull length 42’ 4”
Waterline length 38’ 5”
Beam (width) 13’ 1”
Draft 6’ 7”
Light displacement 20062 lbs
Ballast weight 6834 lbs
Ballast type Cast iron fin with lead bulb
Grand Soleil 43 - Maletto's   Rig and sails
Upwind sail area 1033 sq.ft
Mainsail area 614 sq.ft
Genoa area 420 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum (carbon fiber as an option)
Number of levels of spreaders 2
Spreaders angle Swept-back
Grand Soleil 43 - Maletto's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
22.02
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
161
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.30 knots
Grand Soleil 43 - Maletto's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 55 HP
Fuel type Diesel
Fuel tank capacity 58.1 gal
Grand Soleil 43 - Maletto's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 6 / 8
Head(s) 2
Fresh water tank capacity 95.1 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Grand Soleil 43 - B&C Standard42’ 6”2006
Grand Soleil 43 - B&C Shoal draft42’ 6”2006
Moody 41 Aft Shoal draft41’ 8”2009
Italia 12.98 Shoal draft41’ 4”2015
Salona 41 Shoal draft41’2010
Grand Soleil 43 - J&J Shoal draft42’ 7”1998
Grand Soleil 45 - J&V Race44’ 6”2004
Grand Soleil 45 - J&V Shoal draft44’ 6”2004
Salona 44 Deep draft44’ 4”2009
X-43 Sport42’ 5”2003
X-43 Shoal draft42’ 5”2003
Pogo 12.50 Swing keel40’2010
Elan E6 Deep draft44’ 7”2017
Moody 45 Aft Shoal draft45’2010
Neo 400 Plus Lifting keel41’ 8”2014
^