The Catalina 380, here in "wing keel" version, is a 38’6” monohull sailboat designed by Gerry Douglas. She was built by Catalina Yachts (United States) and made of GRP (glass reinforced polyester). The production started in 1987 and has been awarded the title of "Cruising World - Boat of the Year - Category: Midsize Cruiser" in 1997.
The Catalina 380 is as well listed, on Boat-Specs.com, in version Fin keel and Tall rig.
1997Cruising World - Boat of the Year - Category: Midsize Cruiser
GRP (glass reinforced polyester)
First built hull
Last built hull
Keel : Wing keel
1 spade rudder
Open aft cockpit with closing system
Standard public price ex. VAT (indicative only)
Catalina 380's Main dimensions
Catalina 380's Rig and sails
Upwind sail area
Sloop Marconi masthead
Deck stepped mast
Mast and boom in Aluminum
1x19 strand wire
Number of levels of spreaders
IiFore triangle height (from mast foot to fore stay attachment)
JiFore triangle base (from mast foot to bottom of forestay)
PiMainsail hoist measurement (from tack to head)
EiMainsail foot measurement (from tack to clew)
Catalina 380's Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered. Higher the ballast ratio is, greater is the stability.
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.