Boat-Specs.com

Sailboat specifications and datasheets

Océanis 35 deep draft

The Océanis 35, here in "deep draft" version, is a 32’8” monohull sailboat designed by Jean Marie Finot and Pascal Conq. She was built by Bénéteau (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 2014 and 2016.

The Océanis 35 belongs to the Océanis range. The Océanis 35 is as well listed, on Boat-Specs.com, in version Keel and centerboard and Shoal draft.

Bénéteau Océanis 35 Bénéteau Océanis 35 sailplanBénéteau Océanis 35 layoutBénéteau Océanis 35 layoutBénéteau Océanis 35 layoutBénéteau Océanis 35 layoutBénéteau Océanis 35 sailingBénéteau Océanis 35 sailingBénéteau Océanis 35 accommodationsBénéteau Océanis 35 accommodationsBénéteau Océanis 35 accommodationsBénéteau Océanis 35 accommodations
Océanis 35's   Main Features
Model Océanis 35
Version Deep draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Jean Marie Finot
Pascal Conq
Range Océanis
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 2014
Last built hull 2016
Appendages Keel :
Fin with bulb
Helm 2 wheels
Rudder 2 spade rudders
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Océanis 35's   Main dimensions
Length overall 34’ 4”
Hull length 32’ 8”
Waterline length 31’ 10”
Beam (width) 12’ 2”
Draft 6’ 1”
Light displacement 12198 lbs
Ballast weight 3437 lbs
Ballast type Cast iron
Océanis 35's   Rig and sails
Upwind sail area 584 sq.ft
Downwind sail area 1194 sq.ft
Mainsail area 296 sq.ft
Genoa area 288 sq.ft
Jib area 274 sq.ft
Asymetric spinnaker area 898 sq.ft
Code 0 area 548 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 40’ 10”
JiFore triangle base (from mast foot to bottom of forestay) 14’ 1”
PiMainsail hoist measurement (from tack to head) 40’
EiMainsail foot measurement (from tack to clew) 12’ 10”
Océanis 35's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
17.33
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
35.47
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
172
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
28 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.56 knots
Océanis 35's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 20 HP / 30 HP
Fuel type Diesel
Fuel tank capacity 34.3 gal
Océanis 35's   Accommodation
Cabin(s) (min/max) 1 / 3
Berth(s) (min/max) 2 / 8
Head(s) 1
Fresh water tank capacity 34.3 gal
Water heater capacity 6.6 gal
Holding tank capacity 21.1 gal
Fridge/ice-box capacity 34.3 gal
Galley headroom 6’ 2”
Head headroom 6’ 2”
Océanis 35's   Saloon
Maximum headroom 6’ 2”
Océanis 35's   Fore cabin
Maximum headroom 5’ 11”
Berth length 5’ 8”
Berth width (head/feet) 6’ 7”
1’ 6”
Océanis 35's   Aft cabin
Maximum headroom 5’ 8”
Berth length 6’ 7”
Berth width 4’ 10”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Océanis 35.1 Deep draft32’ 8”2016
Bavaria Cruiser 34 Standard32’2013
Easy 9.7 Standard32’2015
Sun Odyssey 349 Performance32’ 8”2013
Sun Odyssey 319 Fin keel31’2017
Hanse 345 Standard32’ 10”2012
Marlow Hunter 31 Deep draft31’ 11”2015
Océanis 31 Deep draft30’ 6”2007
Bénéteau 31 Deep draft30’ 6”2007
Bénéteau 343 Deep draft34’ 1”2004
Océanis 343 Clipper Deep draft34’ 1”2004
Bavaria Cruiser 32 Standard32’2010
Dufour 360 Grand Large32’ 10”2017
Dufour 350 Grand Large32’ 8”2014
Océanis 331 Fin keel32’ 10”1999
^