Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

First 30E Shoal draft

Sailboat specifications

The First 30E is a 30’4” (9.25m) cruiser-racer sailboat designed by Jean Berret (France). She was built between 1981 and 1984 by Bénéteau (France) with 443 hulls completed. The Shoal draft version features a shorter keel to grant access to shallow areas.

The First 30E is as well listed, on Boat-Specs.com, in Deep draft and S / Deep draft version (see all the versions compared).

First 30E's main features

Model
First 30E
Version
Shoal draft
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Sailboat range
Sailboat collection
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
443
First built hull
1981
Last built hull
1984
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Former French navigation category
2
Standard public price ex. VAT (indicative only)
N/A

First 30E's main dimensions

Overall length
31’ 10”9.7 m
Hull length
30’ 4”9.25 m
Waterline length
25’ 4”7.71 m
Beam (width)
10’ 7”3.23 m
Waterline beam (width)
8’ 6”2.58 m
Draft
4’ 4”1.3 m
Mast height from DWL
41’ 6”12.65 m
Fore freeboard
3’ 6”1.08 m
Mid-ship freeboard
3’0.9 m
Light displacement (MLC)
7496 lb3400 kg
Maximum displacement (MLDC)
8929 lb4050 kg
Ballast weight
2866 lb1300 kg
Ballast type
Cast iron
French customs tonnage
7.92 Tx

First 30E's rig and sails

Upwind sail area
518 ft²48.12 m²
Downwind sail area
916 ft²85.09 m²
Mainsail area
195 ft²18.09 m²
Genoa area
323 ft²30.03 m²
Solent area
273 ft²25.4 m²
Jib area
211 ft²19.6 m²
Symmetric spinnaker area
721 ft²67 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
37’ 8”11.5 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 4”3.45 m
P
 iMainsail hoist measurement (from tack to head)
32’ 6”9.9 m
E
 iMainsail foot measurement (from tack to clew)
11’3.35 m
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

First 30E's performances

HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
16.0
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
229 ft²/T21.28 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
405 ft²/T37.63 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
210
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
38 %
Wetted area
202 ft²18.8 m²
Righting moment @ 1°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
439 lb.ft61 kg.m
Maximum transverse section
12 ft²1.07 m²
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.74 knots

First 30E's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
6 HP / 15 HP
Fuel type
Diesel
Fuel tank capacity
7.9 gal30 liters

First 30E's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
2
Berth(s) (min./max.)
6 / 7
Head(s)
1
Freshwater tank capacity
26.4 gal100 liters
Maximum headroom
5’ 10”1.76 m
Head headroom
5’ 7”1.71 m

First 30E's saloon

Maximum headroom
5’ 10”1.76 m
Saloon table length
3’ 6”1.08 m
Saloon table width
2’ 10”0.85 m
Berth length
6’ 5”1.95 m
Berth width (head/feet)
2’0.6 m / 1’ 7”0.48 m

First 30E's fore cabin

Maximum headroom
5’ 1”1.54 m
Berth length
6’1.84 m
Berth width (head/feet)
5’ 2”1.6 m / 0’ 10”0.25 m

First 30E's aft cabin

Maximum headroom
5’ 6”1.68 m
Berth length
6’ 8”2.03 m
Berth width (head/feet)
3’ 5”1.05 m / 1’ 10”0.55 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Elite 324 Shoal draft (Kirié)
1986
31’ 6”9.6 m
First 28 Shoal draft (Bénéteau)
1980
28’ 2”8.6 m
Bénéteau R/C 32 Shoal draft (Bénéteau)
1980
31’ 6”9.6 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Bénéteau R/C 27 Shoal draft (Bénéteau)
1978
26’ 1”7.95 m
Aquila Shoal draft (Jeanneau)
1975
27’ 2”8.28 m
First 27 Shoal draft (Bénéteau)
1978
26’ 1”7.95 m
First 32 Shoal draft (Bénéteau)
1980
31’ 6”9.6 m
First 29 Shoal draft (Bénéteau)
1983
28’ 6”8.7 m
First 305 Shoal draft (Bénéteau)
1984
30’ 8”9.35 m
First 325 Shoal draft (Bénéteau)
1984
32’ 6”9.9 m
First 30E Deep draft (Bénéteau)
1981
30’ 4”9.25 m
First 345 Shoal draft (Bénéteau)
1983
34’ 7”10.55 m
First 31.7 Shoal draft (Bénéteau)
1997
31’ 2”9.5 m
Feeling 960 Shoal draft (Kirié)
1986
31’ 6”9.6 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more