Boat-Specs.com

Sailboat specifications and datasheets

First 30E s / Deep draft

The First 30E, here in "s / Deep draft" version, is a 30’4” monohull sailboat designed by Jean Berret. She was built by Bénéteau (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 1981 and 1984 with 443 hulls completed.

The First 30E belongs to the First range and the Half Tonner class. The First 30E is as well listed, on Boat-Specs.com, in version Deep draft and Shoal draft.

Bénéteau First 30E Bénéteau First 30E sailplanBénéteau First 30E layoutBénéteau First 30E layoutBénéteau First 30E sailingBénéteau First 30E sailingBénéteau First 30E sailingBénéteau First 30E cockpitBénéteau First 30E accommodations
First 30E's   Main Features
Model First 30E
Version S / Deep draft
Type of hull Monohull
Shipyard
Designer Jean Berret
Range First
Class Half Tonner
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich balsa / fiberglass / polyester
First built hull 1981
Last built hull 1984
Number of hulls built 443
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 1 spade rudder
Unsinkable No
Trailerable No
French navigation category 2
Standard public price ex. VAT (indicative only) N/A
First 30E's   Main dimensions
Length overall 31’ 10”
Hull length 30’ 4”
Waterline length 25’ 4”
Beam (width) 10’ 7”
Waterline beam (width) 8’ 6”
Draft 5’ 10”
Mast height from DWL 41’ 6”
Fore freeboard 3’ 6”
Mid-ship freeboard 3’
Light displacement 6834 lbs
Maximum displacement 8929 lbs
Ballast weight 2976 lbs
Ballast type Cast iron
French customs tonnage 7.92 Tx
First 30E's   Rig and sails
Upwind sail area 544 sq.ft
Downwind sail area 906 sq.ft
Mainsail area 250 sq.ft
Genoa area 294 sq.ft
Solent area 256 sq.ft
Jib area 211 sq.ft
Symetric spinnaker area 657 sq.ft
Rigging type Sloop Marconi 7/8
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 2
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 37’ 8”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 4”
PiMainsail hoist measurement (from tack to head) 32’ 6”
EiMainsail foot measurement (from tack to clew) 11’
First 30E's   Performances
HN (French rating) 16.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
23.75
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
39.60
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
192
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
44 %
Wetted surface 202 sq.ft
Righting moment @ 1°iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after a rotational displacement. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability at this angle.
439 lbs.ft
Maximum transverse section 12 sq.ft
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.74 knots
First 30E's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 6 HP / 8 HP
Fuel type Diesel
Fuel tank capacity 2.6 gal
First 30E's   Accommodation
Cabin(s) 2
Berth(s) 5
Head(s) 1
Fresh water tank capacity 26.4 gal
Maximum headroom 5’ 10”
Head headroom 5’ 7”
First 30E's   Saloon
Maximum headroom 5’ 10”
Saloon table length 3’ 6”
Saloon table width (min/max) 2’ 10”
Berth length 6’ 5”
Berth width (head/feet) 2’
1’ 7”
First 30E's   Fore cabin
Maximum headroom 5’ 1”
Berth length 6’
Berth width (head/feet) 5’ 2”
0’ 10”
First 30E's   Aft cabin
Maximum headroom 5’ 6”
Berth length 6’ 8”
Berth width (head/feet) 3’ 5”
1’ 10”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
First 305 30’ 8”1984
First 30E 30’ 4”1981
First 305 30’ 8”1984
First 30E 30’ 4”1981
First 32 31’ 6”1980
First 32 31’ 6”1980
Bénéteau R/C 32 31’ 6”1980
First 29 28’ 6”1983
First 29 Keel and centerboard28’ 6”1983
First 29 28’ 6”1983
First 30 Fin keel28’ 11”1977
Bénéteau R/C 30 Fin keel28’ 11”1977
Rush 30’ 2”1979
Rush Regatta30’ 2”1979
Kelt 9m Fin keel29’ 6”1981
Rush Royale TDF30’ 2”1979
Kelt 9m Keel and centerboard29’ 6”1981
Rush 30’ 2”1979
Attalia 32 30’ 2”1983
Dufour 28 Mezzo Fin keel28’ 8”1983
^