Boat-Specs.com

Sailboat specifications and datasheets

First 29 shoal draft

The First 29, here in "shoal draft" version, is a 28’6” monohull sailboat designed by Jean Marie Finot. She was built by Bénéteau (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 1983 and 1989 with 520 hulls completed.

The First 29 belongs to the First range. The First 29 is as well listed, on Boat-Specs.com, in version Deep draft and Keel and centerboard.

Bénéteau First 29 Bénéteau First 29 sailplanBénéteau First 29 layoutBénéteau First 29 layoutBénéteau First 29 accommodations
First 29's   Main Features
Model First 29
Version Shoal draft
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Jean Marie Finot
Range First
Construction Hull:
monolithic fiberglass / polyester
Deck:
sandwich fiberglass / polyester
First built hull 1983
Last built hull 1989
Number of hulls built 520
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
French navigation category 2
Standard public price ex. VAT (indicative only) N/A
First 29's   Main dimensions
Length overall 29’ 6”
Hull length 28’ 6”
Waterline length 24’ 7”
Beam (width) 9’ 11”
Draft 4’ 5”
Light displacement 6614 lbs
Ballast weight 2205 lbs
Ballast type Cast iron
French customs tonnage 7.40 Tx
First 29's   Rig and sails
Upwind sail area 501 sq.ft
Downwind sail area 893 sq.ft
Mainsail area 183 sq.ft
Genoa area 318 sq.ft
Solent area 251 sq.ft
Jib area 167 sq.ft
Stormjib area 46 sq.ft
Symetric spinnaker area 710 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 34’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 10”
PiMainsail hoist measurement (from tack to head) 29’ 11”
EiMainsail foot measurement (from tack to clew) 10’ 10”
First 29's   Performances
HN (French rating) 16.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
22.35
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
39.90
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
201
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
33 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.65 knots
First 29's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 9 HP
Fuel type Diesel
Fuel tank capacity 6.6 gal
First 29's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 23.8 gal
Fridge/ice-box capacity 15.9 gal
Maximum headroom 6’ 1”
Head headroom 5’ 6”
First 29's   Saloon
Maximum headroom 5’ 8”
Saloon table length 3’ 5”
Saloon table width (min/max) 2’ 8” / 3’ 8”
First 29's   Fore cabin
Maximum headroom 4’ 11”
Berth length 6’ 7”
Berth width 4’ 11”
First 29's   Aft cabin
Maximum headroom 5’ 7”
Berth length 6’ 7”
Berth width (head/feet) 5’ 1”
2’ 5”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
First 28 Shoal draft28’ 2”1980
First 28 Deep draft28’ 2”1980
First 29 Keel and centerboard28’ 6”1983
First 285 Keel and centerboard27’ 2”1987
First 30E Shoal draft30’ 4”1981
First 285 Wing keel27’ 2”1987
First 305 Shoal draft30’ 8”1984
First 32 Deep draft31’ 6”1980
First 27 Deep draft26’ 1”1978
First 32S5 Wing keel31’ 10”1989
First 32S5 Fin keel31’ 10”1989
First 310 Wing keel30’1990
First 325 Shoal draft32’ 6”1984
First 265 Wing keel26’1990
First 31.7 Shoal draft31’ 2”1997
^