Boat-Specs.com

Sailboat specifications and datasheets

Bavaria Cruiser 41 standard

The Bavaria Cruiser 41, here in "standard" version, is a 39’4” monohull sailboat designed by Bruce Farr. She was built by Bavaria Yachtbau (Germany) and made of GRP (glass reinforced polyester). The production started in 2011 .

The Bavaria Cruiser 41 is as well listed, on Boat-Specs.com, in version Shoal draft.

Bavaria Yachtbau Bavaria Cruiser 41 Bavaria Yachtbau Bavaria Cruiser 41 sailplanBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 layoutBavaria Yachtbau Bavaria Cruiser 41 sailingBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodationsBavaria Yachtbau Bavaria Cruiser 41 accommodations
Bavaria Cruiser 41's   Main Features
Model Bavaria Cruiser 41
Version Standard
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Bruce Farr
Construction GRP (glass reinforced polyester)
First built hull 2011
Last built hull Still in production
Appendages Keel :
Fin with bulb
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) About
148 000
(2017)
Bavaria Cruiser 41's   Main dimensions
Length overall 40’ 6”
Hull length 39’ 4”
Waterline length 35’ 1”
Beam (width) 13’
Draft 6’ 8”
Mast height from DWL 61’ 4”
Light displacement 19136 lbs
Ballast weight 6032 lbs
Ballast type Cast iron
Bavaria Cruiser 41's   Rig and sails
Upwind sail area 883 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 51’ 10”
JiFore triangle base (from mast foot to bottom of forestay) 13’ 10”
PiMainsail hoist measurement (from tack to head) 50’ 6”
EiMainsail foot measurement (from tack to clew) 17’ 5”
Bavaria Cruiser 41's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
19.41
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
201
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
32 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.94 knots
Bavaria Cruiser 41's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 28 HP
Fuel type Diesel
Fuel tank capacity 55.5 gal
Bavaria Cruiser 41's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 55.5 gal
Bavaria Cruiser 41's   Saloon
Maximum headroom 6’ 5”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Bavaria 40 Cruiser - Farr Standard39’ 4”2010
Vision 42 Standard41’2012
Marlow Hunter 40 Shoal draft40’2013
Hanse 415 Standard39’ 4”2012
Marlow Hunter 37 Shoal draft37’ 6”2014
Dufour 412 Grand Large39’ 4”2016
Sun Odyssey 409 Deep draft39’ 4”2010
Delphia 40.3 Deep draft39’ 2”2009
Sun Odyssey 419 Deep draft39’ 4”2015
Marlow Hunter 42 SS Shoal draft40’2017
Bavaria Cruiser 36 Standard35’ 10”2010
Hanse 418 Medium draft39’ 4”2017
Sun Odyssey 41 DS Standard39’ 4”2012
Bavaria Cruiser 37 Standard35’ 10”2014
Sun Odyssey 39 DS Standard38’ 1”2006
^