Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Bavaria B/One Cruising

Sailboat specifications

The Bavaria B/One is a 23’4” (7.09m) multiple crew sport keel boat designed by Farr Yacht Design (United States). She was built between 2012 and 2014 by Bavaria Yachts (Germany). The Cruising version displays the smallest rig and sail area available on this boat.

The Bavaria B/One is as well listed, on Boat-Specs.com, in Race version (see all the versions compared).

Bavaria B/One's main features

Model
Bavaria B/One
Version
Cruising
Hull type
Monohull
Category
Multiple crew sport keel boat
Sailboat builder
Sailboat designer
Country
Germany
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2012
Last built hull
2014
Appendages
Keel : fin with bulb, lifting
Helm
Single tiller
Rudder
Single transom hung rudder
Unsinkable
No
Trailerable
Yes
Standard public price ex. VAT (indicative only)
N/A

Bavaria B/One's main dimensions

Overall length
23’ 11”7.28 m
Hull length
23’ 4”7.09 m
Waterline length
20’ 11”6.36 m
Beam (width)
8’ 2”2.49 m
Draft
5’ 5”1.65 m
Draft when appendages up
1’ 5”0.43 m
Mast height from DWL
35’ 5”10.8 m
Light displacement (MLC)
2315 lb1050 kg
Ballast weight
816 lb370 kg
Ballast type
Lead

Bavaria B/One's rig and sails

Upwind sail area
301 ft²28 m²
Downwind sail area
646 ft²60 m²
Mainsail area
194 ft²18 m²
Genoa area
108 ft²10 m²
Asymmetric spinnaker area
452 ft²42 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
26’ 2”8 m
J
 iFore triangle base (from mast foot to bottom of forestay)
8’ 7”2.61 m
P
 iMainsail hoist measurement (from tack to head)
28’ 8”8.76 m
E
 iMainsail foot measurement (from tack to clew)
11’ 5”3.48 m
Rigging type
Sloop Marconi fractional
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
Continuous

Bavaria B/One's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
292 ft²/T27.1 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
625 ft²/T58.08 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
116
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
35 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.12 knots

Bavaria B/One's auxiliary engine

Engine(s)
No engine

Bavaria B/One's accommodations and layout

Cockpit
Open aft cockpit
Berth(s)
4
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
RS Elite (RS Sailing)
2004
24’ 4”7.4 m
Platu 25 (Bénéteau & McDell Marine)
1992
24’ 6”7.48 m
Bénéteau 25 (Bénéteau & McDell Marine)
1992
24’ 6”7.48 m
Drakkar 24 (Dufour)
2015
23’7 m
M 7.50 (BG Race)
2015
24’ 7”7.5 m
Monotype 7.50 (Keltic Marine)
2015
24’ 7”7.5 m
First 25 - 2013 Shoal draft (Bénéteau)
2013
24’ 7”7.5 m
Elan S1 (Elan Yachts)
2015
20’ 10”6.34 m
Elan E1 (Elan Yachts)
2015
20’ 10”6.34 m
Melges 24 (Melges & Devoti Sailing)
1993
24’7.32 m
RS 21 Race (RS Sailing)
2018
20’ 10”6.34 m
J/22 (J/Boats)
1983
22’ 6”6.85 m
J/70 (J/Boats)
2012
22’ 8”6.93 m
Bavaria B/One Race (Bavaria Yachts)
2012
23’ 4”7.09 m
Delphia 24 OD (Delphia Yachts)
2006
24’7.32 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more