Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Surprise Swing keel

Sailboat specifications

The Surprise is a 25’1” (7.65m) one design sailboat designed by Joubert Nivelt Design (France). She is built since 1977 by Archambault (France) and BG Race (France). The Swing keel version features an appendage configuration without compromise between draft and performance. The only drawbacks are the space is taken inside and the effort needed to lift the keel....

The Surprise is as well listed, on Boat-Specs.com, in Fin keel and Twin keel version (see all the versions compared).

Surprise's main features

Model
Surprise
Version
Swing keel
Hull type
Monohull
Category
One design sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
About 1600
First built hull
1977
Last built hull
Still in production
Appendages
Lifting keel : swing keel
Helm
Single tiller
Rudder
Single transom hung rudder
Unsinkable
No
Trailerable
Yes
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
C
Former French navigation category
3
Standard public price ex. VAT (indicative only)
About 
32 700
 (2017)

Surprise's main dimensions

Hull length
25’ 1”7.65 m
Waterline length
21’ 8”6.6 m
Beam (width)
8’ 1”2.48 m
Draft
5’ 2”1.6 m
Draft when appendages up
2’ 7”0.8 m
Mast height from DWL
32’ 2”9.8 m
Light displacement (MLC)
2976 lb1350 kg
Ballast weight
1323 lb600 kg
Ballast type
Cast iron
French customs tonnage
3.49 Tx

Surprise's rig and sails

Upwind sail area
328 ft²30.5 m²
Downwind sail area
662 ft²61.5 m²
Mainsail area
178 ft²16.5 m²
Genoa area
151 ft²14 m²
Jib area
108 ft²10 m²
Symmetric spinnaker area
484 ft²45 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
26’ 5”8.05 m
J
 iFore triangle base (from mast foot to bottom of forestay)
6’1.83 m
P
 iMainsail hoist measurement (from tack to head)
29’ 6”9 m
E
 iMainsail foot measurement (from tack to clew)
10’ 10”3.3 m
Rigging type
Sloop Marconi 7/8
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Surprise's performances

IOR rating
 iIOR, or International Offshore Rule, was a measurement rule system used internationally for ocean racing. It allows boats of different sizes and designs to race each other fairly. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
23.6
HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
19.5
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
269 ft²/T24.97 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
542 ft²/T50.35 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
133
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
44 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.24 knots

Surprise's auxiliary engine

Engine(s)
Outboard engine
Engine(s) power
10 HP

Surprise's accommodations and layout

Cockpit
Closed aft cockpit
Berth(s)
4
Maximum headroom
4’ 10”1.45 m

Surprise's saloon

Maximum headroom
4’ 6”1.36 m
Saloon table length
2’ 1”0.63 m
Saloon table width
1’ 11”0.59 m
Berth length
6’ 7”2 m
Berth width
2’0.6 m

Surprise's fore cabin

Berth length
5’ 10”1.77 m
Berth width (head/feet)
4’ 7”1.4 m / 1’ 4”0.4 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Platu 25 (Bénéteau & McDell Marine)
1992
24’ 6”7.48 m
Fun (Jeanneau & Cantiere Nautico Lillia)
1982
23’ 4”7.1 m
Surprise Fin keel (Archambault & BG Race)
1977
25’ 1”7.65 m
A27 Swing keel (Archambault)
2012
27’ 5”8.35 m
Bénéteau 25 (Bénéteau & McDell Marine)
1992
24’ 6”7.48 m
First 25 - 2013 Swing keel (Bénéteau)
2013
24’ 7”7.5 m
Catalina 22 MkII Swing keel (Catalina Yachts)
1995
21’ 6”6.55 m
Catalina 25 Swing keel (Catalina Yachts)
1978
25’7.62 m
First 235 Swing keel (Bénéteau)
1986
21’ 7”6.57 m
J/80 (J/Boats)
1993
26’ 2”8 m
J/24 (J/Boats)
1977
24’7.32 m
First 260 Spirit Swing keel (Bénéteau)
1994
24’ 7”7.49 m
First 25 Swing keel (Bénéteau)
1979
24’ 10”7.55 m
First 26 Swing keel (Bénéteau)
1984
25’ 5”7.75 m
Gib'Sea 264 (Gibert Marine)
1995
25’ 5”7.75 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more