Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Copain Fin keel

Sailboat specifications

The Copain is a 17’2” (5.25m) cruising sailboat designed by Henri Amel (France). She was built between 1962 and 1968 by Amel (France). The Fin keel version adopts a classical fin configuration, the easiest option to provide a low center of gravity.

The Copain is as well listed, on Boat-Specs.com, in Keel and centerboard version (see all the versions compared).

Copain's main features

Model
Copain
Version
Fin keel
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
About 50
First built hull
1962
Last built hull
1968
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single transom hung rudder
Unsinkable
Yes
Trailerable
Yes
Standard public price ex. VAT (indicative only)
N/A

Copain's main dimensions

Hull length
17’ 2”5.25 m
Waterline length
16’4.88 m
Beam (width)
5’ 11”1.8 m
Waterline beam (width)
5’ 4”1.62 m
Draft
3’0.9 m
Light displacement (MLC)
1058 lb480 kg
Ballast weight
397 lb180 kg

Copain's rig and sails

Upwind sail area
172 ft²16 m²
Downwind sail area
269 ft²25 m²
Mainsail area
75 ft²7 m²
Genoa area
97 ft²9 m²
Solent area
65 ft²6 m²
Jib area
32 ft²3 m²
Symmetric spinnaker area
194 ft²18 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Copain's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
281 ft²/T26.1 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
439 ft²/T40.78 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
117
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
38 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
5.36 knots

Copain's auxiliary engine

Engine(s)
1 outboard engine
Engine(s) power (min./max.)
3 HP / 5 HP
Fuel type
Gas

Copain's accommodations and layout

Cockpit
Closed aft cockpit
Berth(s)
2
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
First 18 Fin keel (Bénéteau)
1978
18’5.5 m
Kelt 5.50 Lifting keel (Kelt)
1978
17’ 11”5.45 m
Albin Viggen (Albin Marine)
1966
23’ 4”7.1 m
Catalina 22 MkII Fin keel (Catalina Yachts)
1995
21’ 6”6.55 m
Catalina 18 Wing keel (Catalina Yachts)
2000
18’5.49 m
Tonic 23 Fin keel (Jeanneau)
1985
22’ 7”6.9 m
Super Mistral Sport (Amel)
1961
22’ 7”6.9 m
Copain Keel and centerboard (Amel)
1962
17’ 2”5.25 m
Flirt Fin keel (Jeanneau)
1976
19’ 8”6 m
Jidzo (CNSO Constructions Nautique du Sud-Ouest)
1978
19’ 8”6 m
Love love (Jeanneau)
1970
21’ 8”6.6 m
Daïmio (CNSO Constructions Nautique du Sud-Ouest)
1973
20’ 4”6.2 m
Kelt 6.20 Fin keel (Kelt)
1974
20’ 4”6.2 m
Jouët 680 Fin keel (Yachting France)
1978
21’ 6”6.55 m
Jouët 600 Fin keel (Yachting France)
1979
19’ 8”6 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more