Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Albin Nimbus 42 Race

Sailboat specifications

The Albin Nimbus 42 is a 41’4” (12.6m) cruiser-racer sailboat designed by Kaufman & Ladd (United States). She was built between 1981 and 1985 by Albin Marine (Sweden). The Race version displays a deeper fin allowing a lower center of gravity and extra performance especially upwind.

The Albin Nimbus 42 is as well listed, on Boat-Specs.com, in Standard and Keel and centerboard version (see all the versions compared).

Albin Nimbus 42's main features

Model
Albin Nimbus 42
Version
Race
Hull type
Monohull
Category
Offshore cruiser-racer sailboat
Sailboat builder
Sailboat designer
Country
Sweden
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich Airex fiberglass polyester
First built hull
1981
Last built hull
1985
Appendages
Keel : fin without bulb
Helm
Single helm wheel
Rudder
Single rudder on skeg
Unsinkable
No
Trailerable
No
Standard public price ex. VAT (indicative only)
N/A

Albin Nimbus 42's main dimensions

Hull length
41’ 4”12.6 m
Waterline length
34’ 1”10.4 m
Beam (width)
12’ 6”3.8 m
Waterline beam (width)
10’ 10”3.3 m
Draft
7’ 2”2.2 m
Mast height from DWL
58’ 1”17.7 m
Light displacement (MLC)
21499 lb9752 kg
Ballast weight
10000 lb4536 kg

Albin Nimbus 42's rig and sails

Upwind sail area
871 ft²80.9 m²
Mainsail area
385 ft²35.8 m²
Genoa area
485 ft²45.1 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
54’16.46 m
J
 iFore triangle base (from mast foot to bottom of forestay)
18’5.49 m
P
 iMainsail hoist measurement (from tack to head)
49’14.94 m
E
 iMainsail foot measurement (from tack to clew)
15’4.57 m
Rigging type
Cutter Marconi masthead
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Albin Nimbus 42's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
191 ft²/T17.72 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
245
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
47 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.83 knots

Albin Nimbus 42's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
50 HP
Fuel type
Diesel
Fuel tank capacity
60 gal227 liters

Albin Nimbus 42's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
2
Berth(s) (min./max.)
5 / 8
Head(s)
2
Freshwater tank capacity
120.2 gal455 liters
Maximum headroom
6’ 4”1.93 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Grand Soleil 45 - Frers Standard (Cantiere Del Pardo)
1988
44’ 1”13.44 m
Oyster SJ41 Mast head rigging (Oyster)
1980
39’ 8”12.09 m
Oyster SJ43 Fractional rigging (Oyster)
1981
43’ 5”13.22 m
First 42 S / Deep draft (Bénéteau)
1981
41’ 11”12.77 m
Dufour 39 Deep draft (Dufour)
1982
38’ 1”11.6 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Albin Nimbus 42 Standard (Albin Marine)
1981
41’ 4”12.6 m
Bénéteau R/C 42 S / Deep draft (Bénéteau)
1981
41’ 11”12.77 m
Swan 411 (Nautor's Swan)
1977
40’ 10”12.44 m
Swan 42 Standard (Nautor's Swan)
1980
42’12.8 m
First 435 Deep draft (Bénéteau)
1984
44’13.4 m
Swan 441 Cruising (Nautor's Swan)
1978
44’ 5”13.54 m
Sun Fast 42 Lead keel (Jeanneau)
1996
40’ 10”12.45 m
Sun Fast 41 Lead keel (Jeanneau)
1990
40’ 2”12.25 m
Sun Légende 41 Regatta (Jeanneau)
1985
40’ 2”12.25 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more