Boat-Specs.com

Sailboat specifications and datasheets

Salona 33 medium draft

The Salona 33, here in "medium draft" version, is a 32’10” monohull sailboat designed by J&J Design. She was built by AD Boats (Croatia) and made of sandwich fiberglass / polyester with galvanised steel frame. The production started in 2013 .

The Salona 33 belongs to the Salona Yachts range. The Salona 33 is as well listed, on Boat-Specs.com, in version Deep draft and Shoal draft.

AD Boats Salona 33 AD Boats Salona 33 sailplanAD Boats Salona 33 layoutAD Boats Salona 33 layoutAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 sailingAD Boats Salona 33 accommodationsAD Boats Salona 33 accommodationsAD Boats Salona 33 accommodations
Salona 33's   Main Features
Model Salona 33
Version Medium draft
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer J&J Design
Range Salona Yachts
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 2013
Last built hull Still in production
Appendages Keel :
Fin without bulb
Helm 1 tiller (helm wheel in option)
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Salona 33's   Main dimensions
Hull length 32’ 10”
Waterline length 29’ 8”
Beam (width) 11’
Draft 5’ 8”
Light displacement 10913 lbs
Ballast weight 2425 lbs
Salona 33's   Rig and sails
Upwind sail area 748 sq.ft
Mainsail area 344 sq.ft
Genoa area 404 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum (carbon fiber as an option)
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 42’ 8”
JiFore triangle base (from mast foot to bottom of forestay) 12’ 5”
PiMainsail hoist measurement (from tack to head) 41’
EiMainsail foot measurement (from tack to clew) 14’ 5”
Salona 33's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
23.93
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
190
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
22 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.30 knots
Salona 33's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 21 HP
Fuel type Diesel
Fuel tank capacity 23.8 gal
Salona 33's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1
Fresh water tank capacity 26.4 gal
Holding tank capacity 11.1 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Bavaria Cruiser 34 Shoal draft32’2013
Easy 9.7 Shoal draft32’2015
Bénéteau 323 Keel and centerboard32’2003
Bénéteau 31 Keel and centerboard30’ 6”2007
Pogo 30 Swing keel30’2013
Bavaria Cruiser 37 Shoal draft35’ 10”2014
Optio Swing keel29’ 6”2014
Marlow Hunter 33 Furling mainsail33’ 1”2011
Delphia 34 Centerboard (Trunk)32’ 7”2014
Delphia 34 Keel and centerboard32’ 7”2014
Salona 38 Deep draft37’ 8”2011
Salona 38 Medium draft37’ 8”2011
Delphia 31 Centerboard (Trunk)31’ 1”2012
Delphia 31 Keel and centerboard31’ 1”2012
Hallberg-Rassy 34 Shoal draft33’ 8”1990
^