Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Super Daïmio Deep draft

Sailboat specifications

The Super Daïmio is a 27’7” (8.4m) cruising sailboat designed by François Sergent (France). She was built between 1975 and 1984 by Constructions Nautique du Sud-Ouest, CNSO (France). The Deep draft version displays a deeper fin allowing a lower center of gravity and extra performance especially upwind.

The Super Daïmio is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Super Daïmio's main features

Model
Super Daïmio
Version
Deep draft
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Single skin fiberglass polyester
Number of hulls built
About 300
First built hull
1975
Last built hull
1984
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single semi-spade rudder
Unsinkable
No
Trailerable
No
Former French navigation category
2
Standard public price ex. VAT (indicative only)
N/A

Super Daïmio's main dimensions

Hull length
27’ 7”8.4 m
Waterline length
23’7 m
Beam (width)
9’ 2”2.8 m
Draft
5’ 2”1.6 m
Mast height from DWL
37’ 5”11.4 m
Light displacement (MLC)
6614 lb3000 kg
Ballast weight
1874 lb850 kg

Super Daïmio's rig and sails

Upwind sail area
459 ft²42.65 m²
Downwind sail area
807 ft²75 m²
Mainsail area
161 ft²15 m²
Genoa area
298 ft²27.65 m²
Solent area
213 ft²19.8 m²
Jib area
142 ft²13.2 m²
Stormjib area
43 ft²4 m²
Symmetric spinnaker area
646 ft²60 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Super Daïmio's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
221 ft²/T20.5 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
388 ft²/T36.06 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
248
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
28 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.42 knots

Super Daïmio's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
10 HP / 16 HP
Fuel type
Diesel

Super Daïmio's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
1
Berth(s) (min./max.)
2 / 5
Head(s)
1
Maximum headroom
5’ 11”1.8 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Sangria Deep draft (Jeanneau & Gibert Marine)
1969
25’7.62 m
Oyster 26 (Oyster)
1978
26’ 2”7.98 m
Kelt 8m Deep draft (Kelt)
1977
26’ 2”8 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Griffon 26 Fin keel (Westerly)
1979
26’7.93 m
Trident 80 Deep draft (SMAP Neptune)
1975
26’ 2”8 m
Centaur Sloop (Westerly)
1969
25’ 11”7.9 m
Super Daïmio Shoal draft (CNSO Constructions Nautique du Sud-Ouest)
1975
27’ 7”8.4 m
Attalia 32 Deep draft (Jeanneau)
1983
30’ 2”9.2 m
Brin de folie Deep draft (Jeanneau)
1975
29’ 6”9 m
Gib'Sea 262 Deep draft (Gibert Marine)
1989
25’ 4”7.7 m
Dufour 2800 Deep draft (Dufour)
1977
27’8.23 m
Etap 30 Deep draft (Etap)
1984
29’ 8”9.05 m
Jouët 920 Deep draft (Yachting France)
1979
30’ 5”9.27 m
Dufour 3800 Deep draft (Dufour)
1980
30’ 6”9.3 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more